2006 jeep liberty factory ride height

vincennescrd · **Posted:** Sat Apr 23, 2011 2:02 pm

Can anyone tell me what the factory ride height Is on my 06 Crd. Previous owner said she replaced front suspension at 80000 miles. I'm looking at lifting but need to know the ride height to see if I need new coils thanks

irollgen4s · **Posted:** Sat Apr 23, 2011 2:26 pm

despite the mileage replace everything with aftermarket shocks and springs. the ride quality alone is worth the money :2cents:

vincennescrd · **Posted:** Sat Apr 23, 2011 2:43 pm

I probably will but out of curiosity do you know what the height is by chance

HoosierJeeper · **Joined:** Sun Feb 15, 2009 8:23 am **Posts:** 1218

From the hub to bottom of fender flare should be 19" for front and 19.5" for rear.

vincennescrd · **Posted:** Sat Apr 23, 2011 8:09 pm

Thank you very much

HoosierJeeper · **Joined:** Sun Feb 15, 2009 8:23 am **Posts:** 1218

No prob...so what are the measurements?

vincennescrd · **Posted:** Mon Apr 25, 2011 7:24 am

Haven't had a chance to measure but I'll post when I find out. By the way I also joined the geo Suzuki world. I got a geo tracker beater

vincennescrd · **Posted:** Tue Apr 26, 2011 12:03 pm

It has settled 1 inch all the way around. Thanks for the help guys. Who all sells coils factory and lift wise

j-rod · **Joined:** Mon Apr 25, 2011 9:05 pm **Posts:** 201

HoosierJeeper wrote:

From the hub to bottom of fender flare should be 19" for front and 19.5" for rear.

just measured my wifes KJ. 100k miles.

front - 18 7/8"
rear - 19.5"

:pepper:

liquidxit2 · **Posted:** Tue Apr 26, 2011 3:03 pm

My 2006 gasser is at ~18in for each and Im at ~52k miles. Thank God the talon actually sold and Ill have my OME ordered by the end of the week hopefully.

I would look at OME or frankenlift kits as they seem to last the longest and have the best ride.

Xodius · **Posted:** Tue Apr 26, 2011 4:55 pm

Get the OME lift HD and you will love it. I have it on mine and love it today as much if not more than when I put it on some 55-60k miles ago lol. Current ride height is 22 front and 21 3/4 rear. Just put boilers top plate and clevis lift on last night. Was at 23 front but I hit a few hard dips on my way in and made it all settle back down a bit.

.

Oh and those measurements are with a arb front bumper and winch and a lot of steel out back.

ricci2424 · **Joined:** Thu Jul 05, 2012 2:01 am **Posts:** 11

I'm at 18 front and 18.5 rear on my 2005 gasser with 85k on her. Should I replace all around?

kingjeep · **Posted:** Tue Feb 05, 2013 10:12 am

tire size brand

tommudd · **Posted:** Tue Feb 05, 2013 10:12 am

ricci2424

If you want a better ride, better handling etc then yes

tommudd · **Posted:** Tue Feb 05, 2013 10:13 am

kingjeep wrote:

tire size brand

?????

ricci2424 · **Joined:** Thu Jul 05, 2012 2:01 am **Posts:** 11

Mine are 225/75/16 Goodyear wrangler st. They have a pretty good amount of tread left so I'm not gunna replace them right away. I also wanna put an OME lift on. Just wanted to know if my suspension should be replaced with those measurements I posted.

JeepMorrison · **Joined:** Thu Jul 16, 2009 11:34 am **Posts:** 1236

My DD is a 06 and currently sitting at 19 all way around. Next week or so im putting ironman on it.

Sent from my Home Phone using Tapatalk 2

HedsIc · **Posted:** Wed Feb 06, 2013 9:55 pm

My 2006 gasser from the pinch weld was just around 13.5". All stock.

tommudd · **Posted:** Wed Feb 06, 2013 10:14 pm

HedsIc wrote:

My 2006 gasser from the pinch weld was just around 13.5". All stock.

Measure from middle of the wheel to bottom of the flare
that way no matter what size tires etc you have on or anyone else it'll be close

HedsIc · **Posted:** Wed Feb 06, 2013 10:21 pm

Ok, 18.5" front 19" rear.

2006 jeep liberty factory ride height

Who is online