It is currently Sun Oct 19, 2025 5:24 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Factory Lightbar Install, Issues with Cluster Indicator.
PostPosted: Wed Feb 27, 2013 1:04 am 
Offline
LOST Member

Joined: Fri Feb 22, 2013 11:54 pm
Posts: 161
Let me start out by saying that this is not a "bought from dealer" install.

This is literally a factory install.

I rebuilt a 2002 liberty limited with a bad motor using a rolled 2002 liberty renegade as a donor.

The limited had the hideous tan interior in it, and I was installing the lightbar anyways, so out came the dash.


When I reinstalled everything, I used the Renegade dash harness for plug and play use of the light bar wiring and switch.

I added the missing wire for the light bar to the Limited engine harness and pinned it in to the appropriate spot in the engine bay fuse box and the approprate spot on the bulkhead connector.

All computers and the cluster installed in the jeep are from the Limited.

If I use the gauges out of the Limited, no roof light indicator
If I use the gauges out of the Renegade, I get a roof light indicator that works appropriately

Fog light indicators work with both gauge clusters.

Obviously as the light bar works great, and the Renegade cluster works when installed, the issue is in the Limited gauge cluster. Any ideas?


Top
 Profile  
 
 Post subject: Re: Factory Lightbar Install, Issues with Cluster Indicator.
PostPosted: Wed Feb 27, 2013 1:08 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 18, 2008 8:37 pm
Posts: 1874
Location: trotwood Ohio
somewere someone did a how to on this

_________________
With enough fabbing, time & $, it's certainly possible.
That being said, it's like boinkin' your sister...just because you can, doesn't mean you should.


Top
 Profile  
 
 Post subject: Re: Factory Lightbar Install, Issues with Cluster Indicator.
PostPosted: Wed Feb 27, 2013 1:12 am 
Offline
LOST Member

Joined: Fri Feb 22, 2013 11:54 pm
Posts: 161
If it in any way, shape, or form had to do with a lightbar kit, it is non-pertinent to what my issue is.

My issue is specifically involving the gauge cluster itself. The BCM and wiring are all good to go. There is absolutely no issue with anything except the fact that the light in the cluster that belongs in the vehicle does not turn on, but I can swap in any of my Renegade clusters and it works great.


Top
 Profile  
 
 Post subject: Re: Factory Lightbar Install, Issues with Cluster Indicator.
PostPosted: Wed Feb 27, 2013 3:55 am 
Offline
LOST Junkie

Joined: Tue Jan 26, 2010 4:26 am
Posts: 844
Location: Hoedspruit , South Africa
My 2002 circuit diagram does not show a "roof light" indicator in the cluster circuitry at all.

Likewise the description of the cluster in the Service manual makes no mention or description of such an indicator in the cluster.

Maybe this indicator only got fitted in later models...specifically the Renegade?
I know that the Renegade only came out here to SA a few years after I bought my 2002 CRD and the Renegade was the first (and only) model to sport the roof light-bar!

Does this light come on when you turn the ignition ON?
Does it come on when you do the cluster test by holding in the odometer reset while turning the ignition ON?

In other words...is this LED actually fitted into place on the cluster with the appropiate symbol on the cluster face? :?

_________________
2002 Export CRD 2.5 Sport


Top
 Profile  
 
 Post subject: Re: Factory Lightbar Install, Issues with Cluster Indicator.
PostPosted: Wed Feb 27, 2013 2:13 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
Billwill wrote:
Does it come on when you do the cluster test by holding in the odometer reset while turning the ignition ON?
In other words...is this LED actually fitted into place on the cluster with the appropiate symbol on the cluster face? :?
THIS.

I would do the cluster test to see if it is there. That would be the first step.

8)

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
 Post subject: Re: Factory Lightbar Install, Issues with Cluster Indicator.
PostPosted: Wed Feb 27, 2013 8:33 pm 
Offline
LOST Member

Joined: Fri Feb 22, 2013 11:54 pm
Posts: 161
There is an LED in it, I think. Both clusters I've had apart had both had every LED


What is the cluster test?


Top
 Profile  
 
 Post subject: Re: Factory Lightbar Install, Issues with Cluster Indicator.
PostPosted: Wed Feb 27, 2013 8:54 pm 
Offline
LOST Member

Joined: Fri Feb 22, 2013 11:54 pm
Posts: 161
nvm, it's just like my cherokee. Got it, all lights work, it is there.


Top
 Profile  
 
 Post subject: Re: Factory Lightbar Install, Issues with Cluster Indicator.
PostPosted: Wed Feb 27, 2013 8:54 pm 
Offline
LOST Member

Joined: Fri Feb 22, 2013 11:54 pm
Posts: 161
obviously still doesn't work with roof light on, though. programming I imagine.


Top
 Profile  
 
 Post subject: Re: Factory Lightbar Install, Issues with Cluster Indicator.
PostPosted: Wed Feb 27, 2013 9:38 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
I know you said you tried it with the renegade, and it works, but...

I'm not sure if the 2002 is different from my 2007 in regards to the programming of the light, maybe someone will know the exact answer, but on my 2007, all I had to do was put a ground wire in pin 19 of the BCM.

Image
Image

Have you tried to just directly ground it, bypassing the switch? Maybe the switch/wiring is faulty? Eliminate all other variables and just see if it turns on when it is directly grounded.

8)

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
 Post subject: Re: Factory Lightbar Install, Issues with Cluster Indicator.
PostPosted: Wed Feb 27, 2013 9:55 pm 
Offline
LOST Member

Joined: Fri Feb 22, 2013 11:54 pm
Posts: 161
the dash harness is out of the renegade, and the wire is pre-existing as a result. The issue is specifically with the Limited cluster in and of itself. Everything works right when using the Renegade cluster, but the mileage is innacurate to the body, and the dealer says they can't legally reflash a cluster that they didn't source.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com