It is currently Fri Dec 19, 2025 11:12 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: OME springs without A-arms?
PostPosted: Mon Mar 11, 2013 2:09 am 
Offline
LOST Member

Joined: Sun Feb 24, 2013 11:20 pm
Posts: 284
anyone out there getting by ok without A-arms from JBA? Are OME springs known to hit the a-arms? I have A-arms on the way but just wondering.


Top
 Profile  
 
 Post subject: Re: OME springs without A-arms?
PostPosted: Mon Mar 11, 2013 2:22 am 
Offline
Lifetime Member & Advertising Vendor
Lifetime Member & Advertising Vendor
User avatar

Joined: Mon Sep 06, 2010 5:52 pm
Posts: 2172
Location: NEVADA
You'll be ok without them as long as you don't do any clevis lift or top plates. If they are on the way then i'd wait and install everything at the same time.

_________________
2010 KK 4WD BRILLIANT BLACK
Fox/King/Bilstein ATH BUMPERS ATH RACK GY DURATRACS


ATHFAB.com


Top
 Profile  
 
 Post subject: Re: OME springs without A-arms?
PostPosted: Mon Mar 11, 2013 10:00 am 
Offline
LOST Member
User avatar

Joined: Fri Nov 11, 2011 2:03 pm
Posts: 371
Location: West Michigan
I've got the OME springs and clevis left with stock A arms with no issues so far

_________________
'08, OME HD/MD coils, Ironman shocks, Al's A-arms, Top plates, ATH front recovery, V-Tec Offroad wheels 17x8.5, Goodyear Wrangler DuraTrac's 265/65R17, Jasper Offroad 12" Dual LED lightbar, Mopar hitch and harness, RRO roof rails and cross bars, Viper throttle body, K&N FIPK, Hypertech Max Energy


Top
 Profile  
 
 Post subject: Re: OME springs without A-arms?
PostPosted: Thu Apr 11, 2013 6:07 pm 
Offline
LOST Member
User avatar

Joined: Sun Jul 10, 2005 11:07 pm
Posts: 220
Location: Detroit, MI
I did the A-Arms. Just went to the dealer today to inspect the thunking noise I've been getting since I put the lift on. Got JBA's OME 1.5inch lift (really is 3) w/A-Arms. Someone recommended to loosen then retighten the torsion bar (I've been calling the sway bar :banghead: ) to specs. Tried to get some input from JBA but they have kinda left me high and dry. Dealer said if this didn't fix it, next was to replace the sway bar bushings, or right control arm lwr (seems that's where the sound is coming from as per the tech), or the most costly issue, the steering rack. They said they have seen more then they should KK's at 70k+ miles where the gears inside the rack are wearing out due to bigger tires and just premature wear and tear? I just looked at the tech with that glazed over look :ALONE: and just stuck to my rehearsed line, "but it didn't do this till after the lift was installed".. hoping they would figure it out. So, 30 bucks later and 3 hours of my life I will never get back, I'm driving it and it's not made any sounds since the loosen/tighten assault. Bottom line, the dealer says the lift kit didn't do anything to it in order to make the noise :furious: and JBA won't return my calls (emails)..

Good luck if you have problems. :5SHOTS:

_________________
2009 Liberty Sport (black)
1.5 OME lift from JBA
Full Skids
JCR Offroad-Stage 2 Rock Sliders
Weathertech mats
Weathertech wind guards
Mopar bug shield/Roof rails/crossmembers
Hankook dynapro A/T 255/65 16's
Hidden Hitch w/3ball-1hook rcvr (knee cap killer)


Top
 Profile  
 
 Post subject: Re: OME springs without A-arms?
PostPosted: Thu Apr 11, 2013 6:16 pm 
Offline
LOST Junkie
User avatar

Joined: Tue Dec 04, 2012 4:44 pm
Posts: 633
Location: South Jersey
Hmm that doesn't sound much like the JBA that everybody loves

_________________
Alec
1987 Jeep XJ
The Build Thread
Chincy 2" lift for now
31x10.50r15s
HPD30 front and D44 rear


Top
 Profile  
 
 Post subject: Re: OME springs without A-arms?
PostPosted: Thu Apr 11, 2013 6:27 pm 
Offline
LOST Addict
User avatar

Joined: Thu Oct 29, 2009 5:59 pm
Posts: 2127
Location: Navarre FL
he does take a while/not return emails on occasion. ive had it happen to me probably twice...


Top
 Profile  
 
 Post subject: Re: OME springs without A-arms?
PostPosted: Wed Apr 17, 2013 3:20 pm 
Offline
LOST Member
User avatar

Joined: Sun Jul 10, 2005 11:07 pm
Posts: 220
Location: Detroit, MI
Been about a week and I've put the KK through some paces (tight turns, bumps, etc) and have not had any issues since. I hope what was done fixed it. Now I can focus on if I want to or what kind of limited slip or lockers I want for it. Then I'm DONE adding to it.... well, maybe moving to 17's and bit taller tire but for now, I think it needs a rest. :grim:

_________________
2009 Liberty Sport (black)
1.5 OME lift from JBA
Full Skids
JCR Offroad-Stage 2 Rock Sliders
Weathertech mats
Weathertech wind guards
Mopar bug shield/Roof rails/crossmembers
Hankook dynapro A/T 255/65 16's
Hidden Hitch w/3ball-1hook rcvr (knee cap killer)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com