Question about gearing....

KJ_WHEELER_2010 · **Posted:** Tue Mar 19, 2013 10:11 pm

Guess we are going to pull the trigger and regear to 4.10s. We just have to buy the gears because we can install them free in our shop. I know the upsides to reagearing....better mpg...helps the tranny.....etc. But what I was wondering is where has everyone gotten their gears at? I was looking at JeepinByAl, because I got my lift from him. I think I'll get the front diff gears from him. However on the rear, would these work..http://www.summitracing.com/parts/rmg-c ... /overview/ ? I just wanna make sure I get the right thing.

long_tall_texan · **Posted:** Wed Mar 20, 2013 1:20 pm

Yes. Those should work.

Sent from my MeanROM LTEvo with TapaTalk II

KJ_WHEELER_2010 · **Posted:** Thu Mar 21, 2013 12:21 pm

Thanks, I thought they would but wanted to make sure.

tommudd · **Posted:** Thu Mar 21, 2013 1:58 pm

haven't heard too many running Richmond but should work, good gears are getting harder to find, a lot are going cheap Chinese route :roll:

long_tall_texan · **Posted:** Thu Mar 21, 2013 2:29 pm

Make sure you get the 29 spline pinion, not the 27 spline one that some of the XJs used.

Edit: Sorry, that is axle, not pinion. Oops.

KJ_WHEELER_2010 · **Posted:** Fri Mar 22, 2013 7:17 pm

long_tall_texan wrote:

Make sure you get the 29 spline pinion, not the 27 spline one that some of the XJs used.

Edit: Sorry, that is axle, not pinion. Oops.

Thanks. Ok

Question about gearing....

Who is online