What size gauges do i need to order for my Gaugepod.com pod? I cant find anything in the search area and wanna order my gauges now so i can get them in the same time that mu cluster comes.

My other question is what does everyone recommend for a transmission temp set up. i have a glowshift boost gauge already, but was curiouse on what everyone does for trans temp. I will be using stock tranny pan since i need all the ground clearance i can get.

_________________
2005 Kj CRD
Straight piped
Edge tuner
245/75/r16 Wrangler MT/R's
'02 dodge 3/4ton pick-em-up truck
35 12.50 16 Super swamper ltbs
Built 360, Built transmission dana 60s front and rear
5 inch bds/tough country/Dodgeoffroad lift
Hurculined inside the cab
^contact me if interested, maybe selling for the right price to SAS the CRD

I found out what size they were, 2 1/16" gauges. My next question is, who has the right up with pictures of installing the boost gauge, if i have metal CAC pipes, cant i just tap into my intake manifold pipe and get a reading there?

_________________
2005 Kj CRD
Straight piped
Edge tuner
245/75/r16 Wrangler MT/R's
'02 dodge 3/4ton pick-em-up truck
35 12.50 16 Super swamper ltbs
Built 360, Built transmission dana 60s front and rear
5 inch bds/tough country/Dodgeoffroad lift
Hurculined inside the cab
^contact me if interested, maybe selling for the right price to SAS the CRD

Yes

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Glad i did metal piped then, i got a 1/8th inch cupoler with a 1/8th inch nipple. should be installing next week

_________________
2005 Kj CRD
Straight piped
Edge tuner
245/75/r16 Wrangler MT/R's
'02 dodge 3/4ton pick-em-up truck
35 12.50 16 Super swamper ltbs
Built 360, Built transmission dana 60s front and rear
5 inch bds/tough country/Dodgeoffroad lift
Hurculined inside the cab
^contact me if interested, maybe selling for the right price to SAS the CRD

There are other alternatives. I've seen a fitting for Samco or similar hoses or there are several spots in the intake that can be used including at least one that's threaded and just needs a tiny (1/8" or so) hole drilled in the bottom.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

i ended up taking out the engine cover stud/ball drilling it out with a 5/16 drill bit and tapping it with a 1/8th inch tap. then drill a smaller drill bit all the way through. THen put my fitting in. and bam, i got boost

_________________
2005 Kj CRD
Straight piped
Edge tuner
245/75/r16 Wrangler MT/R's
'02 dodge 3/4ton pick-em-up truck
35 12.50 16 Super swamper ltbs
Built 360, Built transmission dana 60s front and rear
5 inch bds/tough country/Dodgeoffroad lift
Hurculined inside the cab
^contact me if interested, maybe selling for the right price to SAS the CRD

That's where I put mine.

_________________
05CRD: GDE Hot ECU & TCM tunes, Provent, Cat filter, Facet lift pump, TransGo kit, Florida TC, Samcos, stainless brake lines, HDS thermostat, Renegade light bar,
RL super sliders, Bilstein adjustables, Al's Gen 4.5 Arms, 235/85-16 Duratracs, DTT rear, Elocker front, EVIC+TPMS, Turbo timer, McNally pillar gauges, Weeks Stage II kit.

The place I mentioned is an existing threaded hole, used by at least one forum member. If you draw an imaginary line from the driver side front edge of the oil filler cap to the driver front edge of the wiring loom cover that line will nearly cross over that spot. Drill the bottom out and install a fitting from like NAPA and hook up your gauge.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Thanks! I have been using the Torque app, but might use gauges later.

_________________


05 CRD Sport Dark Kahki

RRO: Adventure Rack/Rails ** MOPAR: Skids/Renny Flares & 255/75r17 (32.1) BFG M/T on JK wheels ** ARB: Bumper/IPF lights/790/948/shocks ** GDE: TCM/Hot Tune ** ROCKLIZARD: Super Sliders/Komodo Bumper

My Build Thread
US Army Infantry