2010-2011 Renegade Owners

etflies1970 · **Joined:** Tue Mar 20, 2012 8:21 am **Posts:** 37

I scratched up my bumper while wheeling, contacted the dealer no clue what the paint code was for the bumpers and trim of the renegade, next called jeep customer service after a week received a call that they did not know the paint code but these could be a possible match,
PDM Mineral grey metallic
PAV Dark charcoal clear coat
I find it interesting that a auto manufacture has no clue what the paint code is for one of their products.
Hope this helps
Eric
P.S jeep said this is a problem on the RAMs with non standard trim colors to

tommudd · **Posted:** Thu Dec 12, 2013 4:13 pm

PM Marlon_JBT
If anyone knows he does :wink:

etflies1970 · **Joined:** Tue Mar 20, 2012 8:21 am **Posts:** 37

Rodger,
Thanks for the response Tom

ajohns1288 · **Posted:** Thu Dec 12, 2013 6:56 pm

The Renegade fascias and fender flares are molded in color, not painted, so there is no paint code for those parts. They are also more matte than normal paint. My advice is to just rattle can it. Spray on bedliner from harbor freight works well. It's what I used on my grille and flares.

Gageraid · **Posted:** Fri Dec 13, 2013 12:02 am

ajohns1288 wrote:

The Renegade fascias and fender flares are molded in color, not painted, so there is no paint code for those parts. They are also more matte than normal paint. My advice is to just rattle can it. Spray on bedliner from harbor freight works well. It's what I used on my grille and flares.

X2. Maybe try PlastiDip first to see if you like the color. On their website you can choose from a variety of colors.

etflies1970 · **Joined:** Tue Mar 20, 2012 8:21 am **Posts:** 37

Well it might be molded in color on the plastic but the rest of you guys have painted bumpers from the factory not molded in, also there is base black plastic and a coat of primer exposed, i just find it interesting that Chrysler, which uses this color on rims and the grill of the JK mountain edition, and at least two other special editions has no clue what color it is and at least have a touch up for it. To me seems like poor support from Chrylsler.

JeepNCrowd · **Posted:** Sun Dec 15, 2013 1:27 am

I've scratched my plastic fenders pretty good and haven't seen any change in color or black base color. If anything it seems a little lighter in color were it's been scratched/dented. I do find it weird that Chrysler doesn't have any info on it though. I just plan on bed lining all my flares soon though.

Cherrie 274 · **Posted:** Sun Dec 15, 2013 10:45 am

etflies1970 wrote:

Well it might be molded in color on the plastic but the rest of you guys have painted bumpers from the factory not molded in, also there is base black plastic and a coat of primer exposed, i just find it interesting that Chrysler, which uses this color on rims and the grill of the JK mountain edition, and at least two other special editions has no clue what color it is and at least have a touch up for it. To me seems like poor support from Chrylsler.

They only search by model and year.
So if search doesn't bring it up it doesn't exists;).
Need to find the one person that goes outside normal data entry to get that code.

Marlon_JBT · **Posted:** Wed Dec 25, 2013 11:52 am

Matte finish "Dark Neutral Metallic". That's the color, but I don't have a clue what the code is for it.

They are definitely, 100% painted.

The wheels are Mineral Gray.

Roof rails are Argent Silver.

etflies1970 · **Joined:** Tue Mar 20, 2012 8:21 am **Posts:** 37

Thanks Marlon
I knew they were painted. Thanks for the answer, I hope you work for Chrysler but if not you have a better grasp of their product than they do. You have been the biggest help with so far.
Eric

Marlon_JBT · **Posted:** Wed Dec 25, 2013 12:02 pm

etflies1970 wrote:

I hope you work for Chrysler

I do!

Have a great Christmas!

Gageraid · **Posted:** Wed Dec 25, 2013 3:02 pm

Looking good, Marlin!

LKWJeeper · **Posted:** Thu Dec 26, 2013 2:15 pm

Absolutely the best Renegade color!

Scar0 · **Posted:** Thu Dec 26, 2013 3:10 pm

Marlon_JBT wrote:

Matte finish "Dark Neutral Metallic". That's the color, but I don't have a clue what the code is for it.

They are definitely, 100% painted.

The wheels are Mineral Gray.

Roof rails are Argent Silver.

Dark Neutral Metallic, I could not find this color. Except under Ford wheels.
But I did find this under GRILLE / AIR DAM: Gray / FA5 / 81646 (Tungsten Gray Met), Gray / ZSP / 63903 (Deep Gray), or this Gray / XS9 / 60361 (Dark Gray Met).
Under BUMPER / FASCIA / CLADDING, I see 3 colors. Black / CD7 / 69142 (Dark Slate), Black / RXF / 63901 (Jet Black), and Gray / ZSP / 63903 ( Deep Gray).
Mineral Gray metallic wheels = Gray / CDM / 70878
Argent Silver =Silver / S4A / 43343

Marlon_JBT · **Posted:** Fri Dec 27, 2013 12:51 pm

Thanks guys.

But if you look close enough, you can see that my roof rails are still slowly flaking and flaking and flaking.

Maybe one of these days I'll repaint them. It does look kinda tacky like that. I'm waiting until the day that all of the paint falls off first.

2010-2011 Renegade Owners

Who is online