Has anyone thought of making this yet?

JeepMonkey190 · **Posted:** Thu Dec 19, 2013 10:54 pm

The only reason why I'm asking is because I don't have the room to do its at the moment but is anyone working on making rock sliders for our KK's that replaces the side plastic that everyone is taking off anyways?

I saw a picture of a red Jeep Liberty KK somewhere online that had done this already but in Austraila plus I asked where to buy and they didn't respond.

I will try to find the photo.

EDIT: FOUND IT!!!!! here is the link but also some of the pics
http://www.ausjeepoffroad.com/forum/sho ... p?t=121314

[/URL]

lfhoward · **Posted:** Thu Dec 19, 2013 11:02 pm

Jeepin by Al's 4Xguard line for the Grand Cherokee has done it, and JBA's blue KJ with the 6 inch lift has them too. You could email Marlin about whether KK sliders are in development. Here is a gallery of the 4Xguard sliders on a WK: http://4xguard.com/side_guard_gallery

mawlkrawler · **Posted:** Sun Dec 29, 2013 11:18 am

Honestly I like my RL sliders. They keep the black plastic thing protected anyway. Plus the nice 1" tube steel bar helps me get in with the lift and tires on. Lol

Sent from my iPhone 5

silverkk · **Joined:** Mon Feb 04, 2013 12:27 pm **Posts:** 637

I like those

Sent from my iPhone using Tapatalk

Marlon_JBT · **Posted:** Mon Jan 13, 2014 1:01 am

Who's everyone?

I like my plastic. :-)r

Now if only the thing would shift into 3rd and 4th gear...

Mikzor · **Joined:** Fri Feb 03, 2012 7:28 pm **Posts:** 64

JeepMonkey190 wrote:

I saw a picture of a red Jeep Liberty KK somewhere online that had done this already but in Austraila plus I asked where to buy and they didn't respond.

That's my Red KK JeepMonkey190. Sorry, I never saw your question so not sure where you posted it. As the original link you posted said I had them made up by a 4WD Fabrication shop local to me, you can't buy them off the shelf so to speak. That being said there isn't anything overly difficult or technical about them, there just extremely solid and well built.

A good fabricator would be able to reproduce them easily.... I've probably posted enough pictures to go by :wink:

silverkk · **Joined:** Mon Feb 04, 2013 12:27 pm **Posts:** 637

So how much do the sliders run I'm tired of my plastics sides

Sent from my iPhone using Tapatalk

JeepMonkey190 · **Posted:** Tue Jan 14, 2014 1:50 am

Mikzor wrote:

JeepMonkey190 wrote:

I saw a picture of a red Jeep Liberty KK somewhere online that had done this already but in Austraila plus I asked where to buy and they didn't respond.

That's my Red KK JeepMonkey190. Sorry, I never saw your question so not sure where you posted it. As the original link you posted said I had them made up by a 4WD Fabrication shop local to me, you can't buy them off the shelf so to speak. That being said there isn't anything overly difficult or technical about them, there just extremely solid and well built.

A good fabricator would be able to reproduce them easily.... I've probably posted enough pictures to go by :wink:

Ok thanks

JeepMonkey190 · **Posted:** Tue Jan 14, 2014 1:51 am

silverkk wrote:

So how much do the sliders run I'm tired of my plastics sides

Sent from my iPhone using Tapatalk

Usually around $420 the last time I checked for the most constructive ones

Bmxer524 · **Posted:** Tue Jan 14, 2014 1:46 pm

You're looking at around $400 or so, maybe a little more, maybe a little less. It all depends on where you go for it. If you want a better quality slider, you're gonna pay more.

You'll still have the plastic though. There aren't any sliders on the market that replace those yet.

If you want sliders like Mikzor's you're gonna have to have them custom made. That could cost more, or it could even cost less. All depends on what the fabricator/welder wants to charge ya.

Has anyone thought of making this yet?

Who is online