AT THE HELM KK SWITCH PODS- WHO WANTS ONE?

Rescue575 · **Posted:** Thu Jan 23, 2014 5:18 pm

Mikzor wrote:

12KK SFD wrote:

It's definitely a great idea. I'd just need to find more things to add switches for :lol:

Locker Air Compressor, Front Locker, Rear Locker, Front Spotlights, Rear Spotlights, Rock Lights underneath.

Already got all 6 switches planned out.

Ok....now what's a locker?

huntb · **Posted:** Thu Jan 23, 2014 6:02 pm

You know... like when you were in high school. You can put your books and gym clothes in them!

Cherrie 274 · **Posted:** Thu Jan 23, 2014 6:21 pm

That's a good one. But in this case it's to lock an axle- both tires turn together. If you have one in front and rear you truly have 4- wheels driving.

Rescue575 · **Posted:** Fri Jan 24, 2014 8:48 am

huntb wrote:

You know... like when you were in high school. You can put your books and gym clothes in them!

Lol. Thanks hunt!!

huntb · **Posted:** Fri Jan 24, 2014 9:58 am

Just here to help guys. I not all of you are as knowledgeable as I am... :goink:

Here you go Rescue: http://store.arbusa.com/Air-Lockers-C7.aspx

At The Helm · **Posted:** Fri Jan 24, 2014 8:50 pm

My parts cutter said he'd mess around with these this weekend. It'll take a little testing with the plasma table to try and get the holes just right on sheet metal. I'll keep you guys posted on what's going on.

btalyor218 · **Joined:** Mon May 10, 2010 7:18 am **Posts:** 9

Look familiar?

Sent from my GT-N7105T using Tapatalk

Cherrie 274 · **Posted:** Fri Jan 24, 2014 11:29 pm

Nice!

At The Helm · **Posted:** Fri Jan 24, 2014 11:44 pm

Btalyor I think yours is the one I saw a while back. Looks good, did you put a vinyl wrap or something on it?

btalyor218 · **Joined:** Mon May 10, 2010 7:18 am **Posts:** 9

I did it a few years ago (it's been a while since I checked the USA forums!) its just galvanised sheet with vinyl glued to it. Fits 5 switches, LPG gauge and UHF mount easily. I had spare vinyl from the roof console I made, was the same colour as the dash

Sent from my GT-N7105T using Tapatalk

Gageraid · **Posted:** Fri Jan 24, 2014 11:56 pm

That looks like a clean install!

Rescue575 · **Posted:** Sat Jan 25, 2014 10:33 am

That does look awesome. Looks completely stock

Rescue575 · **Posted:** Sat Jan 25, 2014 11:09 am

Hey Morgan, what's the odds that you can cut yours to be more flush like that eliminating that too plate?

jjohnson1892 · **Posted:** Sat Jan 25, 2014 1:01 pm

lfhoward wrote:

Anybody got a pic of one finished and installed in their KK?

Haven't been checking the forums much lately, but I just saw this and wanted to help out! Not the best picture and I've changed stuff around since this one, but I'll get another (read: better) picture soon!

At The Helm · **Posted:** Sat Jan 25, 2014 2:25 pm

Rescue575 wrote:

Hey Morgan, what's the odds that you can cut yours to be more flush like that eliminating that too plate?

Sorry I don't think so. I made mine that way so there's a little more room behind it for the wiring.

At The Helm · **Posted:** Sat Jan 25, 2014 2:31 pm

jjohnson1892 wrote:

lfhoward wrote:

Anybody got a pic of one finished and installed in their KK?

Haven't been checking the forums much lately, but I just saw this and wanted to help out! Not the best picture and I've changed stuff around since this one, but I'll get another (read: better) picture soon!

Thanks for posting that..
There are only two out there, JJohnson's and Texasrugby has the first one, which has six slots.

Texasrugby911 · **Joined:** Thu Feb 04, 2010 3:18 pm **Posts:** 196

Sorry it's taken me so long everyone, but here is my bank.

I worked with the folks over at otrattw.com to have the KK front vector cut into the switches.

jjohnson1892 · **Posted:** Mon Jan 27, 2014 11:26 pm

Sh*t, TexasRugby's came out real clean. I love those rockers and may try to talk to the guys about that!

I'm going to install a CB mic mount on my furtherest left switch and then hopefully going to cut 2 more slots in mine. I want to add some small LED blocks for floods, although my rent security for next year wiped my Jeep fund clean :oops:

EDIT: I'd also love to wrap it in vinyl, so maybe I'll do that down the line

At The Helm · **Posted:** Tue Jan 28, 2014 12:52 am

Texasrugby911 wrote:

Sorry it's taken me so long everyone, but here is my bank.

I worked with the folks over at otrattw.com to have the KK front vector cut into the switches.

Thanks for posting that. Those switches sure did come out nice!

Bmxer524 · **Posted:** Tue Jan 28, 2014 2:31 pm

Texasrugby911 wrote:

Sorry it's taken me so long everyone, but here is my bank.

I worked with the folks over at otrattw.com to have the KK front vector cut into the switches.

I love the the custom KK on the switches!

AT THE HELM KK SWITCH PODS- WHO WANTS ONE?

Who is online