It is currently Mon Oct 06, 2025 12:15 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Intermediate shaft install
PostPosted: Thu Feb 20, 2014 3:20 pm 
Offline
LOST Addict

Joined: Thu Jul 16, 2009 11:34 am
Posts: 1236
So ive search, but when you install a new shaft do you connect it to the cv shaft then slide the whole assembly into the diff case? Or install them as separate pieces?

Sent with the power of children's screams!!!

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.


Top
 Profile  
 
 Post subject: Re: Intermediate shaft install
PostPosted: Thu Feb 20, 2014 3:27 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
I've done it both ways before.
Not sure if there is aright or wrong way.

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Intermediate shaft install
PostPosted: Thu Feb 20, 2014 6:41 pm 
Offline
LOST Addict

Joined: Thu Jul 16, 2009 11:34 am
Posts: 1236
Thanks

Sent with the power of children's screams!!!

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.


Top
 Profile  
 
 Post subject: Re: Intermediate shaft install
PostPosted: Fri Feb 21, 2014 6:38 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Aug 11, 2011 2:17 pm
Posts: 2174
Location: Akron, Ohio
Make sure you put some grease on the splines. :2cents:

_________________
2010 KK Deep Water Blue,OME Liftplus 1",JBA 5.5 UCA ,Dynaflow cat back exhaust, Weathertech VV & mats,Mopar skids,Atthehelm front bumper, Smittybilt XRC 10, Rigid LED's,RL Skink Supersliders,Gecko Safari Basket Detroit Truetrac rear, E-Locker front, G2, Dana 4.10's


Top
 Profile  
 
 Post subject: Re: Intermediate shaft install
PostPosted: Thu Feb 27, 2014 6:12 pm 
Offline
LOST Member
User avatar

Joined: Sun Nov 05, 2006 3:56 am
Posts: 305
Either way will work, but I think your chances of accidentally damaging the axle seal are greater if you have the CV on there since it's just unwieldy, heavy, and harder to handle.

_________________
2006 Sport 4X4, Deep Beryl Green, NSG370, NV241J, Lifted with OME 927/948 and Bilstein, JBA 4.5 UCA's, Custom 3" Rear Y-Link Extension and Swaybar Relocation, 265/75-16 Toyo Open Country AT2 tires, Black Plastidipped bumpers, flares, and doors, Pioneer speakers, Alpine head unit, 1200w Phoenix Gold Amp, 12" Dayton Reference sub.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com