Driver side position lights don't work

EZLiberty · **Joined:** Sat Aug 08, 2009 9:46 pm **Posts:** 84

If I press the brake pedal the 3157 light will illuminate but the position lights alone front and rear do not work on the driver side. Besides chasing the wires, are there two different wiring sets for passenger and driver sides? or different fuses? I will chase the wires if not but this vehicle is very well maintained and the wires are very clean, only driven on paved road so I find it hard to believe they lost contact or shorted but I've been wrong before.

Thanks.

EZLiberty · **Joined:** Sat Aug 08, 2009 9:46 pm **Posts:** 84

I found this: viewtopic.php?f=1&t=33074 I will give it a try.

EZLiberty · **Joined:** Sat Aug 08, 2009 9:46 pm **Posts:** 84

Well I found the problem, condensation inside the front running light housing was causing it to burn the fuses.
Also I can smell burned plastic inside the housing, I checked and I do have the right light bulbs, anyone here switched to LED or anything else? Please feel free to participate on this thread.

Thanks.

bnovamn · **Joined:** Thu Mar 20, 2014 7:14 pm **Posts:** 1

Alright, good find!

Driver side position lights don't work

Who is online