I have a 5.9 Dodge cummins that I totally love. The previous owner had installed the above gauges in a cluster on the left hand side of the window. On a recent trip to Arizona from Oregon and while carrying a 11.5 ft camper and cargo trailer, the information was wonderful to have on the longer hills, so it made me wonder if there is anything like that available for my Jeep CRD? I use the jeep to pull my 2500-3000 pound loaded cargo trailer so having this info would be nice.
Has anyone installed this type of cluster or close to it and if so, what was the brand and if you have any pictures to share, that would be great.

Thanks

Ken

_________________
2006 CRD
2.5 Frankenlift,ARB front bumper with internal winch.snorkel soon to have rock lizard bumper, sliders and roof rails, 2nd gen filter head
GDE eco tune-need trans upgrade and new TC
Beaverton Oregon

There's a 2 gauge pod available but not 3. You can however get 2 in 1 gauges, 2 of these in a 2 gauge pod would give you 4 engine vitals you can monitor. McNally gauges offer 2 in 1's, glowshift gauges make a 3 in 1 but its slightly larger. Here's a pic from a member on here, notpicky,



I really like it but I'm running a gauge pod like what you mentioned.

_________________
05 Liberty Limited CRD, converted to KPA 2863 ball bearing and billet turbo, 50hp injectorsl, complete egr delete, cooling fan delete, weeks intake kit, cummins in tank lift pump, ARP studs, 3" turbo back exhaust, samcos, etecno plugs, GDE trans tune, custom GDE engine tune.

I too am running a 3 gauge "A" pillar setup with boost, EG temp before turbo, and trans temp on my Dodge Cummins. Would love to have the same setup on my Jeep CRD. I am supprised no one makes a 3 gauge "A" pillar gauge pod for our KJ's....

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

Actually the guys that make our 2 gauge pod, gaugepods.com, were going to make a 3 gauge. All they needed were 10 pre-orders before they would make up the mold. LOST members failed miserably with only 3 pre orders placed, so they canceled it and refunded the money.

_________________
05 Liberty Limited CRD, converted to KPA 2863 ball bearing and billet turbo, 50hp injectorsl, complete egr delete, cooling fan delete, weeks intake kit, cummins in tank lift pump, ARP studs, 3" turbo back exhaust, samcos, etecno plugs, GDE trans tune, custom GDE engine tune.

Well that sucks!!! If I would have known, you would have had one more : )

_________________
2006 CRD
2.5 Frankenlift,ARB front bumper with internal winch.snorkel soon to have rock lizard bumper, sliders and roof rails, 2nd gen filter head
GDE eco tune-need trans upgrade and new TC
Beaverton Oregon

I'm right in the middle of adding an A pillar gauge pod and the gauges. Can any body tell me what size screws I need to attach the pod to the A pillar? I wanted the three pod also.

_________________
________
06 Renegade, 265-70-16 Duratracs on Moab's/OMF, RL sliders ,roof rack, On board air, JBA-UCA, adjust-a strut, Rear-OME 948 two uppers ,Sensatrac shocks, Boiler rad. skid, Mopar/4x guard skid,Terra-flex 4:1,HD cooling,more lights, gauges. ARB/Warn, Mudds Rear Bumper.

I would be interested in seeing your setup after you are done

_________________
2006 CRD
2.5 Frankenlift,ARB front bumper with internal winch.snorkel soon to have rock lizard bumper, sliders and roof rails, 2nd gen filter head
GDE eco tune-need trans upgrade and new TC
Beaverton Oregon

Sasquatch Motor Sports makes the vent pod unit for the Glowshift 3-in-1 now

I'm installing this week!

_________________
2006 Jeep Liberty CRD Limited - Nov '14
GDE Eco Tune - Nov '14
Sasquatch Motor Sports Intake Elbow Kit - Jan '15
TB / WP / SAMCO Hoses - Dec '14 (93,000 miles)
Redline Synthetics (Frt/Rear Differentials) - Dec '14 (93,000 miles)