KJ Gauge Panels

weeks101 · **Joined:** Mon Jul 30, 2012 3:29 pm **Posts:** 747

KJ Gauge Panels:

This durable and attractive gauge panel installs in place of any of the dashboard air vents in any KJ using existing vent pod mounting points. The panel features built-in vents which let heat and air conditioning flow around the gauge. It is a nice alternative to the typical pillar-pod style gauge mount which requires you to remove the driver's side grab-bar (useful for getting in and out of lifted vehicles).

- Fits Any 2 1/16" Gauge
- Retains HVAC Functionality
- Retains Factory Grab-Handle
- Easy Installation, Access to Wiring
- Black Powdercoat Finish
- Paintable to Match Interior
- Factory Appearance
- No Dash Modification Needed

How to Pre-Order:

This is going to work similarly to what I did with the Intake Elbows. I need to pre-sell 5 gauge panels to begin production. Once 5 units have sold, production will begin. You will be notified by e-mail when production begins and again when your order ships, with a USPS Priority Mail tracking number.

Pricing:
Single: $50
Pair: $90 (Save $10)
Three: $130 (Save $20)

Order Tracking:

Batch 1: (shipped)

thermorex
thermorex
mass-hole
mass-hole
(anonymous)

Batch 2: (taking orders)

Schachel
Schachel
Schachel

Photos:

mass-hole · **Posted:** Tue May 27, 2014 5:57 pm

weeks101 wrote:

Would you guys be interested in this product?

I'll have a working prototype sometime this weekend, so I can post actual photos then. It's a two-piece design consisting of a mounting bracket and a facing. If there is enough interest I will start things off with a group buy and see where it goes.

This durable and attractive gauge panel installs in place of any of the dashboard air vents in your KJ using existing vent pod mounting points. The panel features built-in vents which let heat and air conditioning flow around the gauge. It is a nice alternative to the typical pillar-pod style gauge mount which requires you to remove the driver's side grab-bar (useful for getting in and out of lifted vehicles).

- Fits Any 2 1/16" Gauge
- Retains HVAC Functionality
- Retains Factory Grab-Handle
- Easy Installation, Access to Wiring
- Black Powdercoat Finish
- Factory Appearance
- No Dash Modification Needed

I would probably be interested but I would prefer if I can get a tan color to match my interior. Not sure if anyone knows of a paint color that matched that I could use instead.

thermorex · **Posted:** Tue May 27, 2014 8:05 pm

Seth, I'd get one, but not more, I'd ran out of vents, lol. It is ideal for mounting a 3 in one gauge in it. I wonder how hard is to design a 3-5 gauge pod to install nicely on the dashboard... Can you work with plastic? I think making it from aluminum would be even better, but I'd guess would be more expensive for "general public" to buy...

RJM · **Posted:** Tue May 27, 2014 8:14 pm

I would be in for two.

JeepMorrison · **Joined:** Thu Jul 16, 2009 11:34 am **Posts:** 1236

Id be down for one or two

Sent with the power of children's screams!!!

WWDiesel · **Posted:** Tue May 27, 2014 9:34 pm

I think a three gauge pod for the "A" pillar would be a big seller as no one has one available for our Jeep Liberty's.... I would love to have one!!!!
gaugepods.com only offers a two gauge pod.

minisub · **Posted:** Tue May 27, 2014 10:27 pm

Pretty neat. I came across the one Rousch makes for mustangs a while back and thought it was a great idea. I can't stand a-pillar mounts, so that seemed like the best option for these beasts. I actually want a boost/EGT unit, and the only one I really like is the ISSPRO 609 which at 3" just should fit.

Your option is nice in that it keeps AC functioning, a 3" will block the whole vent. However, I have been driving for about a year with the driver side center vent totally blocked off and don't miss it. However, if you did it, I would consider separate 2" gauges, one on each side of the dash cluster.

jws84_02 · **Posted:** Tue May 27, 2014 11:34 pm

!!!!!!

weeks101 · **Joined:** Mon Jul 30, 2012 3:29 pm **Posts:** 747

Photos of the mount, as promised.

thermorex · **Posted:** Mon Jun 02, 2014 10:00 pm

Looks pretty good, when can we buy it?

mtbdemon · **Joined:** Fri Aug 24, 2012 5:15 pm **Posts:** 179

Both set ups look really good. I like the 3 gauge pod only because that is what my dodge cummins has. I would be interested in either.......

weeks101 · **Joined:** Mon Jul 30, 2012 3:29 pm **Posts:** 747

thermorex wrote:

Looks pretty good, when can we buy it?

I'll get a pre-order started today. Will need to pre-sell 20 units to get this going.

thermorex · **Posted:** Tue Jun 03, 2014 2:32 pm

Seth, btw, too have a glowshift gauge on the left hand mount? Just curious, I ordered one few days ago and I'm trying to picture how it looks in your pod.

weeks101 · **Joined:** Mon Jul 30, 2012 3:29 pm **Posts:** 747

thermorex wrote:

Seth, btw, too have a glowshift gauge on the left hand mount? Just curious, I ordered one few days ago and I'm trying to picture how it looks in your pod.

Yes that is a Glowshift "MaxTow" 35 psi boost gauge pictured.

thermorex · **Posted:** Tue Jun 03, 2014 7:54 pm

Ok, thanks a lot! I'll be waiting for the pre-order to launch, you market your products like apple the iPhone, lol, making people count the days down.

weeks101 · **Joined:** Mon Jul 30, 2012 3:29 pm **Posts:** 747

I'll take that as a compliment!

I have edited the first post of this thread with all the info.

Thanks for your interest!

thermorex · **Posted:** Wed Jun 04, 2014 9:57 am

weeks101 wrote:

I'll take that as a compliment!

I have edited the first post of this thread with all the info.

Thanks for your interest!

Sure, it was meant as a compliment, the world is crazy for iphones, lol.

Just placed an order for 2 units. Even though I said I only need one... but more gauges is better.

weeks101 · **Joined:** Mon Jul 30, 2012 3:29 pm **Posts:** 747

thermorex wrote:

Just placed an order for 2 units. Even though I said I only need one... but more gauges is better.

Payment received. You have been added to the list. Thanks!

thermorex · **Posted:** Fri Jun 06, 2014 7:06 am

Seth, I'm thinking it may be a good idea to link this post in general forum, this product is not restricted only to crd.

mass-hole · **Posted:** Fri Jun 06, 2014 9:36 am

Just put in for my two. Thanks for your efforts!

KJ Gauge Panels

Who is online