I'm trying to pull the CRD out of my 05 libby.... Where is the rear pick point on the motor? I've got most everything ready, I figure I should use the bracket above the radiator fan for the front, but where do I attach to the back?

_________________
05 Liberty CRD
17 Ram 2500 6.4 Hemi
08 Honda Odyssey
97 Triumph Daytona 595
67 Rokon fully custom.
89 Bass Tracker 16' with 75hp Jet

well, couldn't wait any longer.... As it turns out there are no pic points on the back of the motor. So I used a 2" flatbed semi ratchet strap around the back ... A bit risky I know, but couldn't come up with another way..... I did find some bolt holes on the back of the motor that I can use to make my own pick bracket when installing the motor in my other jeep.

_________________
05 Liberty CRD
17 Ram 2500 6.4 Hemi
08 Honda Odyssey
97 Triumph Daytona 595
67 Rokon fully custom.
89 Bass Tracker 16' with 75hp Jet

Iirc I just bolted a coupl brackets on and yanked it out.

_________________
'05 CRD Limited: 174k mi Euro Torque Converter, EHM, ORM, Racor fuel filter, Original Rocker Arms, Amsoil everywhere
'98 Dodge Ram 2500 Cummins 24 valve extended cab short bed
'01 Jinma 4wd diesel tractor