Provent is In!

crdmike · **Joined:** Tue May 16, 2006 7:25 pm **Posts:** 138

Installed the Provent (breather filter) last night. Nice little addition - Pretty simple install over by the battery. Tried it out today, it does it's job.

Appreciate the advice from everyone. Now to get it breathin like my 98 12 valve Cummins. :idea:

marauderer · **Posted:** Fri May 19, 2006 4:04 pm

crdmike wrote:

Installed the Provent (breather filter) last night. Nice little addition - Pretty simple install over by the battery. Tried it out today, it does it's job.

Appreciate the advice from everyone. Now to get it breathin like my 98 12 valve Cummins. :idea:

Yo, CRDMike, how about some pictures of the install?? IMWTK!!

Over by the Battery. Hmmmm, that is where I was going to put the PermaCool Fuel Filter. I was looking on the passenger side for the Mann Provent.

jeep06 · **Posted:** Fri May 19, 2006 4:24 pm

I WOULD LOVE TO SEE SOME PIX TOO!!!!!!

:):)

crdmike · **Joined:** Tue May 16, 2006 7:25 pm **Posts:** 138

I'll post some stuff later.

jeep06 · **Posted:** Fri May 19, 2006 6:37 pm

marauderer, how do you like your Amsoil Euro oil? I have a case orderd, supposed to have been here today, but warehouse was out.

. Thinking about Provent or open air system.

crdmike · **Joined:** Tue May 16, 2006 7:25 pm **Posts:** 138

http://www.villagephotos.com/pubbrowse. ... id=1677552

Here's some pic's

I used a 36" HVAC tie, a ny-tie tensioner & some hose fittings leaving the OE hose intact. Also ran a line at the bottom down to an opening as a precaution; it's pulling a vacuum but what the heck.

*Convenient removal & reinstall

Goglio704 · **Posted:** Fri May 19, 2006 9:01 pm

crdmike wrote:

http://www.villagephotos.com/pubbrowse.asp?folder_id=1677552

Here's some pic's

I used a 36" HVAC tie, a ny-tie tensioner & some hose fittings leaving the OE hose intact. Also ran a line at the bottom down to an opening as a precaution; it's pulling a vacuum but what the heck.

*Convenient removal & reinstall

Looks good. What do you mean by the line at the bottom pulling a vacuum? Do you mean the drain? It is plugged isn't it?

retmil46 · **Posted:** Sat May 20, 2006 1:28 am

crdmike wrote:

http://www.villagephotos.com/pubbrowse.asp?folder_id=1677552

Here's some pic's

I used a 36" HVAC tie, a ny-tie tensioner & some hose fittings leaving the OE hose intact. Also ran a line at the bottom down to an opening as a precaution; it's pulling a vacuum but what the heck.

*Convenient removal & reinstall

Uhh, dude, you need to plug the end of the drain line. :roll:

Otherwise you're sucking unfiltered air into your intake system, and also all the oil that the filter element has condensed out. You're hooked into the suck side of the turbo, it's going to pull air from wherever it can get it.

crdmike · **Joined:** Tue May 16, 2006 7:25 pm **Posts:** 138

Yes, the line is plugged.

Goglio704 · **Posted:** Sat May 20, 2006 11:58 am

crdmike wrote:

Yes, the line is plugged.

I wasn't trying to second guess you. I just didn't understand what you meant.

crdmike · **Joined:** Tue May 16, 2006 7:25 pm **Posts:** 138

No problem, I wasn't too clear, I was in a hurry when I posted the pic's. etc. Now to get this oil changed.

Provent is In!

Who is online