Yikes ..

I haven't got around to putting my fan and shroud back on yet , from the work I did a month or so ago.
Maybe a good thing ..

I was under the hood last week when I put the Stant Thermostat in and noticed my serp belt half off the power steering pulley .
I didn't realize the pulley went on one way .. Reversed it and all is good .. Didn't hurt the belt at all , luckily .
Can just barely see it in the bottom of this pic .

_________________
Mike__________________
Black 2006 KJ 2.8L CRD Sport
E-Tecno GX3123 7v Glow Plugs/Rockers/Lifters/Head Gasket/TB @ 277KM - Oct 2014
Transgo 45RFE-HD2 / Tranny Filters / Fresh Fluid - 284KM - Jan 2015

So my parts list is as such


Idler pulleys p/n 68211444aa (3of them)
Fan bracket/pulley p/n 5142661ab
Fan clutch Hayden p/n 2905
Fan blade p/n 52079727aa
Radiator p/n cu13279 (spectra premium rock auto)
Decided just to use the original fan shroud and cutting the bottom half off.

I have everything here, except the fan blade. I'll take pictures if the installation.

_________________
91 yj- 2.5L bored, cammed, ported intake,4.0tb,ford 19lb injectors,2.5 exhaust, Ax5 4.88 gears 3.5 BDSlift 33x10.5 bfg km2 lock right(front diff) 8.8 rear, sye, external slave, Durango steering box, browndog off-road mounts

The radiator came in yesterday. I get home today and open the box, and I'm greeted with used grimy factory radiator. Made a phone call to rock auto, and now I have to wait for another one. I'm getting angry with all the issues with parts on this thing.







I'm having no luck.

_________________
91 yj- 2.5L bored, cammed, ported intake,4.0tb,ford 19lb injectors,2.5 exhaust, Ax5 4.88 gears 3.5 BDSlift 33x10.5 bfg km2 lock right(front diff) 8.8 rear, sye, external slave, Durango steering box, browndog off-road mounts

Sent the bad/wrong/used radiator back last Tuesday, and just now receiving the new one today. I'm so ready to get this thing out of the shop and in working order(so is the gf). She is driving her fathers vette. Not a very fun car to drive in the winter.

_________________
91 yj- 2.5L bored, cammed, ported intake,4.0tb,ford 19lb injectors,2.5 exhaust, Ax5 4.88 gears 3.5 BDSlift 33x10.5 bfg km2 lock right(front diff) 8.8 rear, sye, external slave, Durango steering box, browndog off-road mounts

Holly cow dude, just saw this... I am thinking that failed bearing should have made a terrible noise before going to pieces. Good luck with your radiator!

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.

Job is finished. New radiator in. All new parts. No more fan roar when you step on the skinny pedal.

New radiator


Finished and all buttoned up. My yj lurking in the background

_________________
91 yj- 2.5L bored, cammed, ported intake,4.0tb,ford 19lb injectors,2.5 exhaust, Ax5 4.88 gears 3.5 BDSlift 33x10.5 bfg km2 lock right(front diff) 8.8 rear, sye, external slave, Durango steering box, browndog off-road mounts