I hit the mother load!!!

WhitbyKJ · **Posted:** Tue May 12, 2015 10:14 am

Went to the pic yard this am, scouting what I will be pulling on Saturday (free parts day!! 50 dollar entry fee).

Saw me twelve gc wj's with 3.73 gearing

Four KJ's complete, two with skid packages!!

Anybody need anything?

WhitbyKJ · **Posted:** Tue May 12, 2015 2:21 pm

Seriously? Nobody needs anything?

I ain't gonna charge money for this stuff. Lemme know, like a heater knob or a mirror, fuses, relays, coil on plugs, head lights, fascia, come on boys, whatever you need.

tommudd · **Posted:** Tue May 12, 2015 2:38 pm

FREE PARTS DAY , JUST AN ENTRY FEE?
Dang wish they had a day like that around here
I'd be having some low mileage front LCAs , and a whole list of other items stacked up

WhitbyKJ · **Posted:** Tue May 12, 2015 2:52 pm

The only catch is, I gotta carry it out by hand. No team lifts allowed.

Good thing I'm built like a brick doo doo house

tommudd · **Posted:** Tue May 12, 2015 3:53 pm

I'd wear my big overcoat with lots of pockets and hooks all over it, stick things in every pocket, hang crap on me :ROTFL:

odbrochound2 · **Joined:** Wed Aug 28, 2013 9:51 pm **Posts:** 9

I can use a set of skids(later style) plus if a 4cyl diff, if not too much.

WhitbyKJ · **Posted:** Tue May 12, 2015 5:48 pm

I'll see about a set of skids, don't see too many 4 cyl's up here, but sure, you can get a diff.. I'm keeping the cv's and intermediate shaft tho

Only cause I'm making a steel diff and can only carry so much

lol

I have to carry stuff down foot and half aisle ways and physically over the finish line

It was about 500 metres when I was there today.

But yah baby, I'll get her done.

I am taking my old man and brother, so there will be 6 arms to carry.

So the list is:
6 cyl diff
4 cyl diff
Skid plates
18 coil on plugs
2 belts
6 cv shafts
3 intermediate shafts
Alternator
Leather seats (mine are f*ed)
Pockets of fuses, relays, bulbs
Tcase 231
Front driveshaft

I want another cradle for some reason too

Anybody else??

Likewise if you feel like migrating to whitby Ontario for a weekend, stay over at my place... You can use my tools and come with

WhitbyKJ · **Posted:** Tue May 12, 2015 5:51 pm

Oh and I forgot to mention lol every single nut bolt and washer is rusted to hell!!!

venturaII · **Posted:** Wed May 13, 2015 12:36 pm

No team carry-outs, eh? The only things I need at this point are 4cyl front and rear diffs, but you can't exactly stick those in your pockets...

tommudd · **Posted:** Wed May 13, 2015 12:44 pm

venturaII wrote:

No team carry-outs, eh? The only things I need at this point are 4cyl front and rear diffs, but you can't exactly stick those in your pockets...

Not in his pockets, maybe pants legs

WhitbyKJ · **Posted:** Wed May 13, 2015 5:13 pm

Well got an email from heather stating that somebody on here is complaining that I am peddling my products.

She says that emails roll across her desk daily stating that I am violating forum rules by advertising my products on LOSTJEEPs, I am curious to know exactly what products I am advertising??

Giving the offensive nature of this accusation I am pulling my offer.

venturaII · **Posted:** Wed May 13, 2015 7:31 pm

This is just @$#% stupid.

twowings · **Joined:** Sun Nov 23, 2014 10:51 pm **Posts:** 9

MOTHER LODE....not "load"

Rotor · **Posted:** Wed May 13, 2015 8:21 pm

WhitbyKJ wrote:

Well got an email from heather stating that somebody on here is complaining that I am peddling my products.

She says that emails roll across her desk daily stating that I am violating forum rules by advertising my products on LOSTJEEPs, I am curious to know exactly what products I am advertising??

I'm sure the emails are all from the same troll :roll:

WhitbyKJ · **Posted:** Wed May 13, 2015 9:24 pm

Well, I gotta say.

I was pretty irate earlier.

For those of you that haven't had the pleasure of dealing with Heather, I must say, she has a kind of patience that I've never seen before.

When I heard that somebody was complaining about me, I went off the deep end and unloaded all over her. Like how can somebody complain about the prospect of receiving free tech info?

None the less, Heather, if your reading this, I owe you one, thanks for being my crutch during that difficult time. And as such, I'm becoming an official vendor!! Woot woot!

I have been a will remain a loyal lost supporter.

WhitbyKJ · **Posted:** Wed May 13, 2015 9:33 pm

With regards, how come there is no DONATE button?

Hypothetical scenario:

I don't have $365 dollars, but I wanna pitch in 50. Why can't the average joe just do that? Why should one suffer through the emotional pain of always being called an outsider for not supporting financially if they don't have anything to sell/become a vendor?

Last time I checked paid memberships were closed.

So I think, maybe the kettle is being called black.

If your upset that I got free information, please remember, I also contributed. I visit this site 5 times a day to answer questions. And ^^^ above I offered to MULE junkyard parts for anybody that wanted them, for free. Find that anywhere else..

But I am becoming a vendor, of which I plan a complete reinvestment of funds to here and further r and d.

MoD · **Joined:** Sat Mar 17, 2012 12:53 am **Posts:** 1343

Still asking about free parts? I could use some things!

WhitbyKJ · **Posted:** Thu May 14, 2015 2:04 pm

What do you need? I've got a 300 lb load already, hopefully it's light lol. Like a flare or something. Maybe away bar links lol!!

MoD · **Joined:** Sat Mar 17, 2012 12:53 am **Posts:** 1343

I could use a transfer case for sure and the vents inside.

Adamson904 · **Posted:** Thu May 14, 2015 9:29 pm

If you're still doing this I would love some skid plates!

I hit the mother load!!!

Who is online