It is currently Tue Sep 16, 2025 3:37 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Frankenlift 2, JBA upper control arms, 4 inch rear springs.
PostPosted: Thu Aug 13, 2015 6:49 pm 
Offline
LOST Newbie

Joined: Tue Nov 09, 2010 12:23 am
Posts: 70
Location: Milwaukee, WI
2002 Jeep Liberty Sport

So three years ago I purchased a Frankenlift 2 preassembled front kit from boulder bars, 4 inch rear JBA springs and shocks and JBA upper control arms. Due to my previous liberty being totaled 2 weeks later. I now finally purchased a new one, and I'm back in the game here.

I don't mind a slight rake in suspension, but I'm curious how far off height wise I will be front to back. I'd like to purchase clevis spacers from JBA or a 1/4 inch top mount spacer as I feel the front-end will be too low.

Can anyone provide me some advice?

Thanks!!!! :JEEPIN:

_________________
Current:
02 Jeep Liberty Sport

Bone Stock

Past:
02 Jeep Liberty Limited
3.7 V6
Factory installed:
Skid plates
Towing package
Trac-Loc
Upgrades:
RRO Rockfather 2 lift
Sitting at 22 front and rear
245/75/16 Duratracs great tires!!!

Stress, when your gut says,"no way", and your mouth says, "sure no problem"


Top
 Profile  
 
 Post subject: Re: Frankenlift 2, JBA upper control arms, 4 inch rear sprin
PostPosted: Thu Aug 13, 2015 10:58 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Duffner wrote:
2002 Jeep Liberty Sport

So three years ago I purchased a Frankenlift 2 preassembled front kit from boulder bars, 4 inch rear JBA springs and shocks and JBA upper control arms. Due to my previous liberty being totaled 2 weeks later. I now finally purchased a new one, and I'm back in the game here.

I don't mind a slight rake in suspension, but I'm curious how far off height wise I will be front to back. I'd like to purchase clevis spacers from JBA or a 1/4 inch top mount spacer as I feel the front-end will be too low.

Can anyone provide me some advice?

Thanks!!!! :JEEPIN:


Frankenlift will give you 4 inches of lift when installed. You do not want to add anything else to it for more lift or you'll have issues with the springs hitting the UCAs.
Will even have some without adding anything

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Frankenlift 2, JBA upper control arms, 4 inch rear sprin
PostPosted: Fri Aug 14, 2015 8:42 am 
Offline
LOST Newbie

Joined: Tue Nov 09, 2010 12:23 am
Posts: 70
Location: Milwaukee, WI
Sure, so this is still a problem with even with jba upper control arms?


Sent from my iPhone using Tapatalk

_________________
Current:
02 Jeep Liberty Sport

Bone Stock

Past:
02 Jeep Liberty Limited
3.7 V6
Factory installed:
Skid plates
Towing package
Trac-Loc
Upgrades:
RRO Rockfather 2 lift
Sitting at 22 front and rear
245/75/16 Duratracs great tires!!!

Stress, when your gut says,"no way", and your mouth says, "sure no problem"


Top
 Profile  
 
 Post subject: Re: Frankenlift 2, JBA upper control arms, 4 inch rear sprin
PostPosted: Fri Aug 14, 2015 9:06 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Duffner wrote:
Sure, so this is still a problem with even with jba upper control arms?


Sent from my iPhone using Tapatalk



Helps a lot but does not eliminate the issue

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Frankenlift 2, JBA upper control arms, 4 inch rear sprin
PostPosted: Fri Aug 14, 2015 9:10 am 
Offline
LOST Newbie

Joined: Tue Nov 09, 2010 12:23 am
Posts: 70
Location: Milwaukee, WI
Thanks a lot!!!!


Sent from my iPhone using Tapatalk

_________________
Current:
02 Jeep Liberty Sport

Bone Stock

Past:
02 Jeep Liberty Limited
3.7 V6
Factory installed:
Skid plates
Towing package
Trac-Loc
Upgrades:
RRO Rockfather 2 lift
Sitting at 22 front and rear
245/75/16 Duratracs great tires!!!

Stress, when your gut says,"no way", and your mouth says, "sure no problem"


Top
 Profile  
 
 Post subject: Re: Frankenlift 2, JBA upper control arms, 4 inch rear sprin
PostPosted: Fri Aug 14, 2015 9:12 am 
Offline
LOST Newbie

Joined: Tue Nov 09, 2010 12:23 am
Posts: 70
Location: Milwaukee, WI
Now to install!!


Sent from my iPhone using Tapatalk

_________________
Current:
02 Jeep Liberty Sport

Bone Stock

Past:
02 Jeep Liberty Limited
3.7 V6
Factory installed:
Skid plates
Towing package
Trac-Loc
Upgrades:
RRO Rockfather 2 lift
Sitting at 22 front and rear
245/75/16 Duratracs great tires!!!

Stress, when your gut says,"no way", and your mouth says, "sure no problem"


Top
 Profile  
 
 Post subject: Re: Frankenlift 2, JBA upper control arms, 4 inch rear sprin
PostPosted: Sun Aug 30, 2015 1:09 pm 
Offline
LOST Newbie

Joined: Tue Nov 09, 2010 12:23 am
Posts: 70
Location: Milwaukee, WI
Tom, now that I have my lift. I've found quite a few wrangler wheel and tire combos with 255 75 17. I had 245 75 16 using stock wheels and over sized tires Goodyear duratrac on my last liberty. But I know you've seen and experienced quite a few setups. Thoughts?


Sent from my iPhone using Tapatalk

_________________
Current:
02 Jeep Liberty Sport

Bone Stock

Past:
02 Jeep Liberty Limited
3.7 V6
Factory installed:
Skid plates
Towing package
Trac-Loc
Upgrades:
RRO Rockfather 2 lift
Sitting at 22 front and rear
245/75/16 Duratracs great tires!!!

Stress, when your gut says,"no way", and your mouth says, "sure no problem"


Top
 Profile  
 
 Post subject: Re: Frankenlift 2, JBA upper control arms, 4 inch rear sprin
PostPosted: Sun Aug 30, 2015 2:29 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Duffner wrote:
Tom, now that I have my lift. I've found quite a few wrangler wheel and tire combos with 255 75 17. I had 245 75 16 using stock wheels and over sized tires Goodyear duratrac on my last liberty. But I know you've seen and experienced quite a few setups. Thoughts?


Sent from my iPhone using Tapatalk



I assume you mean the Wrangler wheels and tires that are for sale everywhere cheap
Those are from the later model JK Wranglers and have a different bolt pattern than the KJs do.
PLUS those are a 32 inch tall tire and you'd need to regear to at least 4.10s

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Frankenlift 2, JBA upper control arms, 4 inch rear sprin
PostPosted: Sun Aug 30, 2015 5:52 pm 
Offline
LOST Newbie

Joined: Tue Nov 09, 2010 12:23 am
Posts: 70
Location: Milwaukee, WI
For swaps, what should I look out for ?


Sent from my iPhone using Tapatalk

_________________
Current:
02 Jeep Liberty Sport

Bone Stock

Past:
02 Jeep Liberty Limited
3.7 V6
Factory installed:
Skid plates
Towing package
Trac-Loc
Upgrades:
RRO Rockfather 2 lift
Sitting at 22 front and rear
245/75/16 Duratracs great tires!!!

Stress, when your gut says,"no way", and your mouth says, "sure no problem"


Top
 Profile  
 
 Post subject: Re: Frankenlift 2, JBA upper control arms, 4 inch rear sprin
PostPosted: Sun Aug 30, 2015 8:36 pm 
Offline
LOST Addict

Joined: Thu Jul 16, 2009 11:34 am
Posts: 1236
Duffner wrote:
For swaps, what should I look out for ?


Sent from my iPhone using Tapatalk

TJ moab wheels, even if you dont like them, you might make a quick buck

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.


Top
 Profile  
 
 Post subject: Re: Frankenlift 2, JBA upper control arms, 4 inch rear sprin
PostPosted: Sun Aug 30, 2015 10:59 pm 
Offline
LOST Member

Joined: Wed Jan 14, 2015 7:09 pm
Posts: 115
Location: North Arkansas
tommudd wrote:
Duffner wrote:
Tom, now that I have my lift. I've found quite a few wrangler wheel and tire combos with 255 75 17. I had 245 75 16 using stock wheels and over sized tires Goodyear duratrac on my last liberty. But I know you've seen and experienced quite a few setups. Thoughts?


Sent from my iPhone using Tapatalk



I assume you mean the Wrangler wheels and tires that are for sale everywhere cheap
Those are from the later model JK Wranglers and have a different bolt pattern than the KJs do.
PLUS those are a 32 inch tall tire and you'd need to regear to at least 4.10s


Tom, you forgot to mention those are probably the worst tires ever put on a SUV. I often pull them off with less than 10K miles on the set because they've had 5-6 rock punctures in the 4 tires and one's now got an impact break. Nobody in their right mind is gonna buy a single expecting the set to go ahead and wear out without a stinky poo load of flat problems.

Bob


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com