I have the ARB installed and am looking into a set of 4xguard skids. It looks as if the 4x Front Guard(seen here: http://jeepinbyal.com/liberty-2002-2007-kj/4xguard-armor/kj-front-guard.html) may install in the same location as the plate that comes with the bumper. Is this true? If so will the Front Guard skid plate(seen here: http://jeepinbyal.com/liberty-2002-2007-kj/4xguard-armor/kj-front-guard-skid-plate.html) work with the ARB plate that comes with the bumper?

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

It will work with the ARB bumper
I never used that plate that came with the ARB , but I'd say remove it and bolt the 4XGuard one in place.
I have used it with the ARB, The matrix Brush guard and the RL with no issues ( and thats with it bolted to a Skid Row front engine skid )

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Where does that upper loop from the front guard bolt too, the body colored cross beam with the 4 self taping bolts?

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs