AT THE HELM'S SHOP

At The Helm · **Posted:** Tue Jan 05, 2016 11:10 pm

Got some more work done to my bumper. I'm waiting on more shackle tabs to come in, and just need to tab the lights and trailer plug. Can't wait to get it painted and installed!

JeepMorrison · **Joined:** Thu Jul 16, 2009 11:34 am **Posts:** 1236

That thing is sick!!!

Sent from my SM-N900P using Tapatalk

At The Helm · **Posted:** Wed Jan 06, 2016 1:17 am

Thanks Ricky

davinhd · **Posted:** Sun Jan 10, 2016 7:50 pm

darn! I hit the lotto im buying one of everything.

Sent from my moderately smart iPhone using Tapatalk

JeepMorrison · **Joined:** Thu Jul 16, 2009 11:34 am **Posts:** 1236

davinhd wrote:

darn! I hit the lotto im buying one of everything.

Sent from my moderately smart iPhone using Tapatalk

Just one of everything? You should be 10 of everything and donate off the 9 others

Sent from my SM-N900P using Tapatalk

At The Helm · **Posted:** Sun Jan 10, 2016 9:47 pm

davinhd wrote:

darn! I hit the lotto im buying one of everything.

JeepMorrison wrote:

Just one of everything? You should be 10 of everything and donate off the 9 others

At The Helm · **Posted:** Mon Jan 11, 2016 2:57 pm

Finally finished this bad boy

lfhoward · **Posted:** Mon Jan 11, 2016 4:43 pm

That is a gorgeous bumper, ATH. Fantastic workmanship there.

Bmxer524 · **Posted:** Sun Jan 17, 2016 12:36 am

That looks really good!! Please don't leave us for the Tacos lol

tommudd · **Posted:** Sun Jan 17, 2016 1:23 am

At The Helm wrote:

Finally finished this bad boy

One of , no the best looking rear bumper for a Taco I have seen yet.
Your products just keep getting better and better all along
Great work / Fantastic builds
You have a good eye for what looks just right !

Tom

JeepMorrison · **Joined:** Thu Jul 16, 2009 11:34 am **Posts:** 1236

Hey Atthehelm, remember this bumper, the one that went to Germany? Anyway, we finally got around to making that swing out. Your bumper is soooo sweet. It was a challenge but got the hitch welded in and swing out made up in about one and half days. Not bad.

Sent from my SM-N900P using Tapatalk

At The Helm · **Posted:** Mon Jan 18, 2016 6:37 pm

JeepMorrison wrote:

Hey Atthehelm, remember this bumper, the one that went to Germany? Anyway, we finally got around to making that swing out. Your bumper is soooo sweet. It was a challenge but got the hitch welded in and swing out made up in about one and half days. Not bad.

Sent from my SM-N900P using Tapatalk

nice! Yeah that bumper was one of the few I ever made about five years ago. Got chopped into three pieces, shipped to Texasrugby911's APO in Germany, and reassembled there. A lot of revisions have been made to my rear design since then haha.

Turned out really good though!

Texasrugby911 · **Joined:** Thu Feb 04, 2010 3:18 pm **Posts:** 196

At The Helm wrote:

JeepMorrison wrote:

Hey Atthehelm, remember this bumper, the one that went to Germany? Anyway, we finally got around to making that swing out. Your bumper is soooo sweet. It was a challenge but got the hitch welded in and swing out made up in about one and half days. Not bad.

Sent from my SM-N900P using Tapatalk

nice! Yeah that bumper was one of the few I ever made about five years ago. Got chopped into three pieces, shipped to Texasrugby911's APO in Germany, and reassembled there. A lot of revisions have been made to my rear design since then haha.

Turned out really good though!

Pretty neat to know that bumper went half way around the world and back again!

TIJKK1220 · **Posted:** Wed Jan 20, 2016 8:57 am

Texasrugby911 wrote:

At The Helm wrote:

JeepMorrison wrote:

Hey Atthehelm, remember this bumper, the one that went to Germany? Anyway, we finally got around to making that swing out. Your bumper is soooo sweet. It was a challenge but got the hitch welded in and swing out made up in about one and half days. Not bad.

Sent from my SM-N900P using Tapatalk

nice! Yeah that bumper was one of the few I ever made about five years ago. Got chopped into three pieces, shipped to Texasrugby911's APO in Germany, and reassembled there. A lot of revisions have been made to my rear design since then haha.

Turned out really good though!

Pretty neat to know that bumper when half way around the world and back again!

That's why I would never consider parting with it at this point! It has a huge story to tell and I'm lucky that I get to carry it!

Sent from my HTC One M9 using Tapatalk

At The Helm · **Posted:** Sat Jan 23, 2016 3:16 am

Few more bumpers ready to go to their homes!

At The Helm · **Posted:** Sat Jan 23, 2016 3:33 am

Got the Rotopax container mount for tire carriers tacked up.. I was going to offer this as an option on my tire carriers, but now I'm thinking why not just build the entire swing arm from 1.75"X.120" round tube? Build time would go down and yield a cleaner product IMO.

At The Helm · **Posted:** Sat Jan 23, 2016 3:39 am

Also built this custom bumper a couple weeks ago, it's sort of a mashup of my older no winch bumpers and the Lite bumper with a receiver added, built from 3/16" and 1/4" plate. Thought it turned out pretty darn sweet so I'll put a similar version into production and I axed the Lite bumper.

Parts nested for the cnc shop, I'll have three of these new bumpers available soon:

At The Helm · **Posted:** Sat Jan 23, 2016 3:42 am

Oh and racks are coming soon I swear... Just ordered the last of the parts, I want to make sure these things are legit before being shipped

PALiftedKK · **Posted:** Sat Jan 23, 2016 4:02 am

So much goodness!

firebug435 · **Joined:** Thu Jan 07, 2016 3:03 am **Posts:** 13

At The Helm wrote:

Also built this custom bumper a couple weeks ago, it's sort of a mashup of my older no winch bumpers and the Lite bumper with a receiver added, built from 3/16" and 1/4" plate. Thought it turned out pretty darn sweet so I'll put a similar version into production and I axed the Lite bumper.

Parts nested for the cnc shop, I'll have three of these new bumpers available soon:

Got her on friday :rockon:

. Love it. ITS BEEFIER than I expected. Taking her to get a coat of Line-X front and back when I get off from the FH here in a few hours and then installation. Ill post pics when I get it back. I cant wait!!!!! :pepper:

AT THE HELM'S SHOP

Who is online