It is currently Sat Sep 20, 2025 5:33 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Trans. Vent tube
PostPosted: Thu Feb 18, 2016 4:27 pm 
Offline
LOST Member

Joined: Fri Apr 08, 2011 3:21 pm
Posts: 251
Location: Chillicothe, Ohio
Does any body know exactly where the transfer case vent tube goes to (Attaches to the body or frame)?

_________________
________
06 Renegade, 265-70-16 Duratracs on Moab's/OMF, RL sliders ,roof rack, On board air, JBA-UCA, adjust-a strut, Rear-OME 948 two uppers ,Sensatrac shocks, Boiler rad. skid, Mopar/4x guard skid,Terra-flex 4:1,HD cooling,more lights, gauges. ARB/Warn, Mudds Rear Bumper.


Top
 Profile  
 
 Post subject: Re: Trans. Vent tube
PostPosted: Thu Feb 18, 2016 6:00 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7362
Location: Central GA
I believe it was originally attached to and terminated on the firewall? :?:
Mine came loose a couple of years ago and fell down so I added a tee to the hose and spliced the transmission vent into the same vent hose and then added a couple more feet to the end of the vent hose and terminated it behind the battery with a tie-wrap...
Never did like the original location anyway!!! :wink:

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Trans. Vent tube
PostPosted: Thu Feb 18, 2016 11:59 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Kind of up behind the engine center ways in that area

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Trans. Vent tube
PostPosted: Fri Feb 19, 2016 2:51 pm 
Offline
LOST Member

Joined: Fri Apr 08, 2011 3:21 pm
Posts: 251
Location: Chillicothe, Ohio
Never did find the dang thing....

_________________
________
06 Renegade, 265-70-16 Duratracs on Moab's/OMF, RL sliders ,roof rack, On board air, JBA-UCA, adjust-a strut, Rear-OME 948 two uppers ,Sensatrac shocks, Boiler rad. skid, Mopar/4x guard skid,Terra-flex 4:1,HD cooling,more lights, gauges. ARB/Warn, Mudds Rear Bumper.


Top
 Profile  
 
 Post subject: Re: Trans. Vent tube
PostPosted: Sat Feb 20, 2016 1:38 am 
Offline
LOST Junkie
User avatar

Joined: Mon Jan 01, 2007 11:41 am
Posts: 687
Location: Canada
Why exactly are you looking for it?

I'll have to look but there should be vent lines from the axles and the transfer case.
At least there is on my YJ. And yes, the transfer case vent should terminate at the firewall.


Sent from my iPad using Tapatalk

_________________
my trail & highway ride (and occasional tow rig)
04 Liberty Sport with a 2.5" lift, ProComp 245/75R16 AT's and two Hella700FF lamps (more accessories to come)

my trail queen
95 YJ with a RE 4" lift, 33" ProComp Extreme's, M8000 Winch, Lockrite Locker up front, Super35 in the rear and 4.88 gears


Top
 Profile  
 
 Post subject: Re: Trans. Vent tube
PostPosted: Sat Feb 20, 2016 8:14 am 
Offline
LOST Member

Joined: Fri Apr 08, 2011 3:21 pm
Posts: 251
Location: Chillicothe, Ohio
LibertyFever wrote:
Why exactly are you looking for it?

I'll have to look but there should be vent lines from the axles and the transfer case.
At least there is on my YJ. And yes, the transfer case vent should terminate at the firewall.


Sent from my iPad using Tapatalk




I had a terra-flex 4:1 put in and was looking for the breather tube and where it landed on the jeep.

_________________
________
06 Renegade, 265-70-16 Duratracs on Moab's/OMF, RL sliders ,roof rack, On board air, JBA-UCA, adjust-a strut, Rear-OME 948 two uppers ,Sensatrac shocks, Boiler rad. skid, Mopar/4x guard skid,Terra-flex 4:1,HD cooling,more lights, gauges. ARB/Warn, Mudds Rear Bumper.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com