When i did the timing belt i found my front crash bar(behind the bumper) was pushed back far enough that its hitting the fan. I was able to pull the fan out but it wouldn't go back in, and i was in a time crunch so i threw it all back together without the fan. Leaving Friday for a 2500+ mile trip from Ohio to southern Florida, maybe down to Key West. Its been a while since i did the TB, and so far i've had 0 issues with the Jeep getting hotter than nomral, even with some 60-70* weather. Its going to be 70-80 in Florida, but i doubt i'll be running the A/C much so i'm not concerned about keeping it ice cold. Will not be towing.
So should i try to get the fan back in, or is the mechanical fan plenty to keep the engine cool? Used to my 7.3's where i can run all day without any fan at all and not have any issues, as long as i keep moving.
_________________ Jimmy 2005 Liberty CRD, 120k miles, tuned, cat delete, Mishimoto hoses, EGR/FCV delete with Euro intake
1997 F-250 ECLB 7.3/E4OD/4wd, 215k miles: FFD 250/200%'s, Swamps IDM, built trans. Tuned by me
2001 F-450 crew cab, XLT ZF-6 7.3: 6637, shimmed 910's, in-tank mods, PHP tunes
|