I need a wiring harness for a 2006 CRD. anyone know of a recent crash victim that may want to part with theirs?

Let me know how much.

Thank you

_________________
2006 Liberty Limited CRD, Deep Beryl Green, Yeti tune, Arp studs, new cams, rockers, lifters, TB. "Green Monster"
2005 Liberty Sport CRD, Deep Beryl Green, GDE Hot Tune, ARP studs. "Rocket"
1982 Fiat 124 Spider Convertible. "Fiona"

Josh has one that I was going to buy, but I think I am going to take the easy route, and use a junker CRD as my "running engine stand". I know Josh, thanks for letting you know lol. I'll send him a message for you.

_________________
05 CRD: H.D.S2 stat,WW Ironrock trilink&LCA's, OX rear,ARB front, 4.10's, ARB bumper, Suncoast,OME 3.5, JBA UCA,rock rails, Moabs&265/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new valves,sasquatch battery tray & grid heater, tensioner relocated
Mech fan, VH & AC delete

Thanks Mountainmen.

Will a 2005 engine harness work in a 2006?

_________________
2006 Liberty Limited CRD, Deep Beryl Green, Yeti tune, Arp studs, new cams, rockers, lifters, TB. "Green Monster"
2005 Liberty Sport CRD, Deep Beryl Green, GDE Hot Tune, ARP studs. "Rocket"
1982 Fiat 124 Spider Convertible. "Fiona"

np, I'm guessing it will work. Does the service manual have separate diagrams for the different years, no right? I think it will work, but I bet Keith would know.

_________________
05 CRD: H.D.S2 stat,WW Ironrock trilink&LCA's, OX rear,ARB front, 4.10's, ARB bumper, Suncoast,OME 3.5, JBA UCA,rock rails, Moabs&265/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new valves,sasquatch battery tray & grid heater, tensioner relocated
Mech fan, VH & AC delete

What harness specifically are you looking for?

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic

The engine harness, it connects to injectors, glow plugs, engine sensors and all.

The original was spliced in several places, including at locations where it connects to the SEGR modification.

I am wondering if the engine bay harnesses are all the same between years and models.. i.e. 2005-2006 years and the sport and limited models.

The CRD that I need the harness for is a 2006 limited.

_________________
2006 Liberty Limited CRD, Deep Beryl Green, Yeti tune, Arp studs, new cams, rockers, lifters, TB. "Green Monster"
2005 Liberty Sport CRD, Deep Beryl Green, GDE Hot Tune, ARP studs. "Rocket"
1982 Fiat 124 Spider Convertible. "Fiona"

Between 05/06 it wont matter about the trim level. However there may be a difference between the 05 and 06 in the PN. I suspect that you will have no issue using an 05 harness in an 06.

However, I would first check the 05 and 06 parts fiche, if the PN is different then I would look at the 05 and 06 manuals lookup the pinout and circuit diagrams. As you are aware the 06 is canbus, however this change should not effect the engine control side in the harness.

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic

Sam,

will do, and check in later

Thanks

_________________
2006 Liberty Limited CRD, Deep Beryl Green, Yeti tune, Arp studs, new cams, rockers, lifters, TB. "Green Monster"
2005 Liberty Sport CRD, Deep Beryl Green, GDE Hot Tune, ARP studs. "Rocket"
1982 Fiat 124 Spider Convertible. "Fiona"

I took a good look at the existing one in your green Gremlin last weekend. The repair of it shouldn't be bad. I'll get that done this weekend. Send me the injectors, and I'll try the swap, too.

_________________
"Gunner": 2007 Jeep Grand Cherokee Limited CRD GDE ECO tune Bought 01Apr16 (71K miles)


If you're in New England and need your KJ TB done, PM me.

Retired:
Tractor: Dark Khaki '06 CRD Sport, GDE ECO & Trans Tunes, 2.5" lift + 245/75r16. - Sold 27Apr16
Ghost: Silver '06 KJ CRD Limited, bunch of goodies done - Sold 18Apr16