Does anyone know what specific version of the CP3 pump our jeeps have? I was surfing TDI club and it seems they have several versions rated for different flow rates and pressures. Some of the names I saw thrown around were R90 and L110. Has anyone had the pump out or gotten a close look to see if it says anything?

Thanks!

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

Im only guessing, but its bosch's "standard" to label the rotation and plunger size without a decimal. R90 could be right hand rotation, 9.0 plunger size. L110 could mean left hand rotation 11.0 mm plungers? Like insaid im only guessing but this is how they labeled there other pumps.

_________________
05 Liberty Limited CRD, converted to KPA 2863 ball bearing and billet turbo, 50hp injectorsl, complete egr delete, cooling fan delete, weeks intake kit, cummins in tank lift pump, ARP studs, 3" turbo back exhaust, samcos, etecno plugs, GDE trans tune, custom GDE engine tune.

That makes complete sense.

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

I will try to remember to take a look when I get back home from the current trip, I have several pumps out sitting on a shelf where I can easily inspect them. Considering how our pump is installed, I would suspect it will be a Right hand and a smaller number. The potential max flow rate for an engine this size is probably somewhere around 10 gallons per hour, so the pump doesn't need to be huge. Much of the flow rate is based on the pulley size however, so maybe the number refers to the diameter or radius of the pulley and all the pumps are the same?

_________________
Proud supporting vendor of LOST Jeeps
TRAVELING CRD TECH. I come to you!
Need help? Just ask! I've taken it apart more than most.
Email jeep [at] maincomputer [dot] com - BOARD MESSAGING IS BROKEN
Over 225 CRDs currently driving with my valves, timing belt, rockers, or ARP Studs.
Bad noises = REALLY bad things.

Photo of the tag from my original pump


Sent from my SM-N920V using Tapatalk

Ok. Pics wont load for some reason. The tag says -

CR/CP3S3/R70/20-7895

Sent from my SM-N920V using Tapatalk

Awesome, thank you!

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs