It is currently Sat Dec 27, 2025 1:32 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Turbo baffle bypass
PostPosted: Thu Feb 23, 2017 2:30 am 
Offline
LOST Newbie

Joined: Sun Dec 30, 2012 11:28 pm
Posts: 3
Hi all first post here but been lurking a while. Just wanted to know if anyone had bypassed the baffle on the intercooler intake and if it makes any difference at all or just more noise.



Sent from my iPad using Tapatalk


Top
 Profile  
 
 Post subject: Re: Turbo baffle bypass
PostPosted: Thu Feb 23, 2017 8:54 am 
Offline
LOST Addict

Joined: Fri Jun 22, 2007 11:43 am
Posts: 4962
Location: Green Cove Springs FL
What baffle are you talking about?
I know of no "baffle" in the turbo or intercooler.

The intake flow path goes like this:
air filter box -> turbo inlet hose -> turbo -> turbo outlet hose -> intercooler -> intercooler outlet hose -> flow control valve (FCV) -> intake manifold

Maybe you are talking about the FCV?
The FCV is like a throttle body but its only purpose is to control engine intake and EGR flow.
If this is what you mean, then yes, the FCV can be deleted.
Most of us delete the FCV by installing this kit https://shop.sasquatchparts.com/products/egr-delete-jeep-liberty-crd/ which also deletes the EGR valve.
Probably the best modification you can do for your engine.

_________________
U.S. Army Retired


Top
 Profile  
 
 Post subject: Re: Turbo baffle bypass
PostPosted: Thu Feb 23, 2017 2:29 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7381
Location: Central GA
flash7210 wrote:
Probably the best modification you can do for your engine.

X2
Absolutely the single Best mod!!! :BINGO:

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Turbo baffle bypass
PostPosted: Wed Mar 01, 2017 10:42 pm 
Offline
LOST Newbie

Joined: Sun Dec 30, 2012 11:28 pm
Posts: 3
flash7210 wrote:
What baffle are you talking about?
I know of no "baffle" in the turbo or intercooler.

The intake flow path goes like this:
air filter box -> turbo inlet hose -> turbo -> turbo outlet hose -> intercooler -> intercooler outlet hose -> flow control valve (FCV) -> intake manifold

Maybe you are talking about the FCV?
The FCV is like a throttle body but its only purpose is to control engine intake and EGR flow.
If this is what you mean, then yes, the FCV can be deleted.
Most of us delete the FCV by installing this kit https://shop.sasquatchparts.com/products/egr-delete-jeep-liberty-crd/ which also deletes the EGR valve.
Probably the best modification you can do for your engine.


This is the baffle, it's on a 2011 KK 2.8.

After turbo and pre intercooler.

Image


Sent from my iPad using Tapatalk


Top
 Profile  
 
 Post subject: Re: Turbo baffle bypass
PostPosted: Wed Mar 01, 2017 11:43 pm 
Offline
LOST Addict

Joined: Fri Apr 02, 2010 3:14 pm
Posts: 2294
Location: Sumter, SC
You definitely aren't from US... We don't have KK with diesel here, just the previous model, kj. We also don't have any intercooler pipes on ours, other than what was made custom.

This being said, I believe that black pipe is in there to help with hose expansion and maybe add some oil resistance. I guarantee that by replacing it with a silicone hose or with some other pipe, you won't improve the vehicle behavior nor add more turbo noise. The easiest is to make turbo noise is to replace the air snorkel, air filter and the connection from filter to turbo.

We (at least Americans and Canadians) can't help you too much with details because your vehicle hasn't been sold here and we have no knowledge regarding any KK diesel aftermarket parts.

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com