These are the ones that I found when I did research on this a couple years ago. There may be some more now, but fitment to the OEM filter head with the correct WIF threads is limited...
Primary OEM Fuel / Water Separator Filters Sensor Port Thread: M12 x 1.5
OEM Mounting Thread Size: 16 X1.5 MM
Gasket dia. 70mm x 63mm --------- *Micron Rating
Mopar 52129238AA ------------------*10
Wix 33647, NAPA 3647 - L-D Fuel Filter ------*10
Baldwin BF7970
Fleetguard FS19781
Donaldson -- P550903 (87mm / 3.42” dia. & 183 mm / 7.2” long) 95%: ----*5 Micron
Purolator -- F65782
Hastings -- FF1168
Luberfiner -- LFF6354
I actually went to this filter that fits the OEM filter head, although I had to change the WIF sensor to a Racor 1/2" UNF WIF sensor (RK 30964) to fit the higher micron filter/water separator.
Donaldson *P550588
Sensor Port Thread ½ x 20 11 micron @ 99% efficiency
This filter also allowed me to add the Donaldson clear separator bowl on the bottom of the above filter. Part No. P569758
I then added a secondary fuel filter, NAPA 3528 or use Donaldson P551313...
See this thread for more information, pictures, and details:>
viewtopic.php?f=98&t=80139
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve