da.brown.m1 wrote:
I returned the ProComps already, just waitong for the m oney to hit my account.
I was looking at some steel wheelsas well. There are very limited options in 16x7 in aluminum.
I was looking at some 16x7 with 4" of backspacing. Will those fit without a lift? Or still require more backspacing with a 7"?
These are the wheels in question
https://www.summitracing.com/parts/crr-3527712They also make them in a 16x8 with 5" of backspacing. That would require me to return the 235/75s and get some 245/70s, which should be doable as wheel.
Thanks for the help.
7 inch wide with 4 inches of backspacing work great when lifted , without lift you will have some rubbing
245-70-16s are not really wide enough, 7 inch tread width with 8 inch wheel, not the best scenario.
With 8 inch wide wheel you need something closer to an 8 inch wide tread, not section width , tread width
Lots of difference between say a Honda and a much heavier Jeep when installing tires