I would like to run America truck tracks on my 2005 CRD but have been told my steering may not be strong enough for the task. Is there any upgrades I can perform to strengthen the steering system? Thanks

_________________
2005 Liberty Sport CRD

GDE HOT Tune
GDE TCM
EH Mod
Euro T.C.
3" straight exhaust w/cat delete
Cone air filter
Ome lift springs
Bilstein shocks & struts

rear:
You may want to consider the IronRock rear upper control arm?
It is super heavy duty as it is designed for the much heavier and larger Jeep Grand Cherokee (WJ)
I build and can provide you with a custom mount that allows it to be installed on the Jeep Liberty.

front:
Have you looked at the JeepIn By Al parts? They sell some very good and heavy duty front end parts for the Liberty.
https://jeepinbyal.com/liberty-2002-2007-kj.html

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

Like most vehicles now, the Liberty uses rack and pinion steering.
If that’s not strong enough, just replace the rack when it wears out or breaks.

Yes to the JBA front upper arms. Stock ones are known to wear out and separate.
And yes to any and all heavy duty suspension upgrades.

It’s a Jeep. Everything wears out and breaks eventually.

_________________
U.S. Army Retired

There's some pretty nice ones made in Canada too !!!!

Look up "Track N Go" by AD Boivin