It is currently Thu Oct 02, 2025 7:14 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: BLEEDING BREAKS WITH SCAN TOOL
PostPosted: Fri Sep 27, 2019 9:53 pm 
Offline
LOST Junkie

Joined: Fri Mar 20, 2015 2:11 pm
Posts: 805
Location: markham, ontario
i apologize this was most likely covered before after replacing right rear break line it was rubbed through and lost alot of break fluid i left the jeep in the garage for a few weeks waiting on parts after installing a new line and bled the system normally im suspecting air was still trapped into ABS system so break pedal felt soft and goes all the way down. i took it for a road test and went on a gavel road to activate the ABS and traction control and it got better and i bled the system again but i do not have the DRB3 scan tool to perform auto bleed test. what do you guys suggest me do from here? find someone with the DRB3 tool or can another tool perform this procedure? thanks!


Top
 Profile  
 
 Post subject: Re: BLEEDING BREAKS WITH SCAN TOOL
PostPosted: Sat Sep 28, 2019 2:54 pm 
Offline
LOST Junkie

Joined: Fri Mar 20, 2015 2:11 pm
Posts: 805
Location: markham, ontario
driving mad on a dirt road did the trick. break pedal is almost at 100%. but i might still end up getting autelmaxicheckpro scan tool from amazon. apparently thats the cheapest tool that can perform this break bleed thanks for reading.


Top
 Profile  
 
 Post subject: Re: BLEEDING BREAKS WITH SCAN TOOL
PostPosted: Sat Mar 28, 2020 3:20 pm 
Offline
LOST Junkie

Joined: Fri Mar 20, 2015 2:11 pm
Posts: 805
Location: markham, ontario
finally I got my Autel Maxicheck Pro from amazon and it did a perfect job bleeding breaks, it took about 2 mins. and the pedal is back to normal and where it should be.


Top
 Profile  
 
 Post subject: Re: BLEEDING BREAKS WITH SCAN TOOL
PostPosted: Sat Mar 28, 2020 4:16 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7365
Location: Central GA
Another very good option for bleeding brakes and it only takes one person. And can be used on many different vehicles with the right adaptor cap.
Works really good!

0113 BLACK LABEL CHRYSLER POWER BLEEDER :google:

Image

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: BLEEDING BREAKS WITH SCAN TOOL
PostPosted: Sun Mar 29, 2020 11:28 pm 
Offline
LOST Member

Joined: Sun Apr 06, 2014 5:23 pm
Posts: 461
A good ole plastic pop bottle work just fine as well and it's free !!!!


Top
 Profile  
 
 Post subject: Re: BLEEDING BREAKS WITH SCAN TOOL
PostPosted: Wed Apr 01, 2020 7:35 pm 
Offline
LOST Junkie

Joined: Fri Mar 20, 2015 2:11 pm
Posts: 805
Location: markham, ontario
I don't drive this jeep often, just once in a while. for some reason I couldn't get the pedal to work 100% once I got the Autel MaxiCheckPRO and followed the procedure activated ABS pump the scanner said open up the bleeder screw on front right wheel and then open up the right rear wheel bleeder screw although I didn't see any air. but after that the pedal felt normal. so I do recommend this scanner.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com