Mrgabesir wrote:
My 2006 Lib CRD has been throwing P1267 for a while, my diesel mech retired and the local Jeep guy (not dealer) says that, based on the code, it will need 4 new plugs and a new harness, which is no longer available from the dealer. Anyone know if this is the case, or if I should take it to someone more diesel savvy? If so, aftermarket recommendations? I really don't want to drop a lot of dough on this, it really doesn't affect me, never gets below 40 here, but I hate having that check light on!
All four Glow Plugs and the harness all going bad at the same time, I say BS!
Your problem is probably a bad connection or just No. 4 GP?
From my notes:
P1267 -- glow plug #4 control circuit low
-- Glow control circuit low indicates a possible problem with the control relay, there by the ECM -- R&R the connector to burnish the contacts, also inspecting for oxidation\corrosion.
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve