Diagnosing #4 leak and/or injector failure.

SJBrooks · **Joined:** Tue Mar 11, 2014 11:01 am **Posts:** 80

Greatly appreciate the info, Layback,

Steve

SJBrooks · **Joined:** Tue Mar 11, 2014 11:01 am **Posts:** 80

SJBrooks wrote:

Yea, WW, I wasn’t comfortable going above the established torque in the first place; cutting the seat is definitely the best way to go. Do you know the diameter of the injector bores? I want to make sure I get a kit with the proper cutter.

Thanks as always,

Steve

WW,

I know you’re intimately familiar with the CRD engine, so do you know what size of bore our injectors sit it? I want to make sure I get a kit that has the right size of reamer.

Thanks as always,

Steve

rankom · **Posted:** Sun May 04, 2025 6:22 pm

17x19mm is correct size flat reamer turns clockwise only.make sure lube it with wd 40 or similar.

SJBrooks · **Joined:** Tue Mar 11, 2014 11:01 am **Posts:** 80

Thanks, Rankom.

Steve

Diagnosing #4 leak and/or injector failure.

Who is online