corwyyn wrote:
Maybe check the shaft to see if it is bent? I know the front end of the propellor shaft is spring-loaded, that may be part of the front-to-back play; not knowing the inner workings of the CVs that well I'd still be curious if there is a problem with the rear joint. You could check the rubber boots around both ends just to make sure they are not torn and letting dirt/grit/grime into the bearings. Anyone else with suggestions? Tom, Troy, Bueller?
I checked my rear u-joint at 25,000 mi. and it was almost dry. I had not yet experienced any vibes, but it was making a clank noise when in 4-lo shifting from drive to reverse. Replaced both rear driveshaft joints with greasable H.D..
_________________
Slightly modified Lt. Khaki 3.7 2004 LTD 4X4. Purchased new 8/6/03.
What I don't have....A Mag light mounted to my seat.
Original Old L.O.S.T. #000354
Nick's Pics & Mods click here:
http://www.cardomain.com/ride/531173http://www.survivaltopics.com/forums/