does anyone make a more "beefy" shock that will lift my KJ enough so that my tires stop rubbing my front bumper and by my pinch weld? I eliminated the entire weld but I'm still rubbing.

any suggestions?

thanks!

_________________
2002 liberty limited. (midnight blue)
K&N CAI
TORNADO
crager soft 8's all around with definity dakota at
TO COME:
lift
exhaust

have ya tried using a heat gun and simply pushing the plastic back into the space around the weld, theres some deadspace behind the liner

* my stock 235/70's rub the pinch because my suspension is so worn out

if youve got a bunch of miles on your stock coils then it's simply gettin time for new ones, throw a spacer ontop of worn out springs and well.. just not a good idea

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632

Shocks dont lift the vehicle my friend. Coil springs and or spacers do. Shocks dampen upward and downward movement.

You might look into a pair of coils spacers to lift your truck 1"-1.5". That might clear up your problem.

_________________
2006 KJ CRD Ltd - Suncoast, GDE Eco, EGR Delete, After market T-Stat, Skid Row skids, V6 airbox, 2.5" Turbo back
2005 KJ CRD Sport-Suncoast, Transco, GDE Hot-GDE Trans, EGR Delete, Skid Row skids, V6 airbox, 2.5" Turbo back, After market S-Stat
1987 Suzuki LWB Samurai -diesel powered, custom 4 link coil suspension 38.5 SX Swampers

Just take off the plastic

_________________
Randy, Apache Junction, Arizona
04 Liberty
Blown motor and extensive body damage.

Define, eliminated.

_________________
2004 TJ Rubicon.

x2 - if you cut it out - you need to weld a plate back over it - it's a structural joint for the unibody.

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur

What size of tire are you running? Because if you're rubbing stock sized tires on the pinch weld then you've got seriously worn springs. Its time for new springs and shocks all around my friend. Most people recommend OME springs with rancho shocks. So much better ride than stock and it gives you more lift than stock.