It is currently Wed Nov 04, 2026 11:19 am

View unanswered posts | View active topics


Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KJ 4X4 Discussion---2002-2007 Liberty Models

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Print view Previous topic | Next topic 
Author Message
Zack A
 Post subject: Engine skid
PostPosted: Tue Feb 02, 2010 2:57 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun May 17, 2009 6:09 pm
Posts: 584
Location: Clayton, North Carolina
I called the dealership to find out about a engine skid and they told me I needed two brakets also since mine did not come with factory skids? I've never heard of such. 2005 Rocky Mountain Edition. Can anyone confirm about the brackets

TIA

_________________
Zack A.
2005 Rocky Mountain Ed.
W4ZWA
Top
 Profile  
 
scoobysnax
 Post subject: Re: Engine skid
PostPosted: Tue Feb 02, 2010 3:56 pm 
Offline
LOST Member

Joined: Thu Jul 12, 2007 1:19 pm
Posts: 451
Location: NYC
I have an 04 that did not have factory skids and I was OK. However, it's the ones up front (near the sway bar) that you'll need to worry about the most. If you have those you're in great shape. The ones for the back part of the skid are on the front cross rail. If you don't have those you can drill through the cross rail and use a 3" bolt. Make sure you use strong bolts - I want to say you need grade 8 or better. Good luck

_________________
'04 Liberty Limited - 245/70/16 Firestone Destination AT's, Mopar tow hooks, Draw-Tite Class IV hitch, Skid Row Engine & Transmission Skids, Mopar T-Case & Gas Tank Skids, Extended Breather Tubes, Red Top Optima, Sylvania Silver Star head lights, Hella 500FF bumper mounted driving lights
Top
 Profile  
 
Zack A
 Post subject: Re: Engine skid
PostPosted: Tue Feb 02, 2010 3:58 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun May 17, 2009 6:09 pm
Posts: 584
Location: Clayton, North Carolina
What do I need to look for to make sure I can go without the so called brackets?

_________________
Zack A.
2005 Rocky Mountain Ed.
W4ZWA
Top
 Profile  
 
JeepinJarhead03
 Post subject: Re: Engine skid
PostPosted: Tue Feb 02, 2010 5:11 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Feb 01, 2009 2:29 am
Posts: 5956
Location: Hillsborough, NC / Corolla NC
not sure what "brackets" they're talking about

perhaps what they meant was the nut-zerts which are like a self tapping sort of thread insert, the threads are usually whats not there - never heard of missing "brackets"

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632
Top
 Profile  
 
06 KJ Sport
 Post subject: Re: Engine skid
PostPosted: Thu Feb 04, 2010 12:01 am 
Offline
LOST Member
User avatar

Joined: Wed Jan 02, 2008 1:40 pm
Posts: 148
Location: Washoe Co. Nevada
I have an extra engine skid plate if you want to buy a used on. Not sure what year it is from but I am on the understanding that with a drill and some bolts you can make anything fit! :rockon:

_________________
Life's Tough...It's Even Tougher If You're STUPID
2006 KJ Sport 3.7L 226cid V6 42RLE w/
Clevis Lift, Mopar Underbelly's, Tow Hooks, Tow Hitch, Custom Rock Rails, Debadged
WANTS:
OME Coil Lift, Crager Soft 8's 16x8 4"bs, Custom Roof Rack, Steel Bumpers, Cobra 75X CB w/ Firefly, Lots O Lights, Lockers, Four X Diff Cover, One Bad Jeep
Top
 Profile  
 
NCC-1864
 Post subject: Re: Engine skid
PostPosted: Sun Feb 07, 2010 3:26 pm 
Offline
LOST Member
User avatar

Joined: Sat Sep 20, 2008 1:35 pm
Posts: 162
Location: 450,Canada
Have a look at this post
http://jeepprojects.com/content.php?article.38
from the picture check if you have as jeepinJarhead03
said these nut -zert already installed on your jeep
It is pretty simple to install( 4 screws with the right torque)
Have fun

_________________
Libby 2004
Modified.
Top
 Profile  
 
Zack A
 Post subject: Re: Engine skid
PostPosted: Sun Feb 07, 2010 3:31 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun May 17, 2009 6:09 pm
Posts: 584
Location: Clayton, North Carolina
Thanks..Ill look around tomorrow and see what I see

_________________
Zack A.
2005 Rocky Mountain Ed.
W4ZWA
Top
 Profile  
 
Zack A
 Post subject: Re: Engine skid
PostPosted: Tue Feb 09, 2010 2:02 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun May 17, 2009 6:09 pm
Posts: 584
Location: Clayton, North Carolina
Does anyone know the weight of the mopar engine skid?

_________________
Zack A.
2005 Rocky Mountain Ed.
W4ZWA
Top
 Profile  
 
ATXKJ
 Post subject: Re: Engine skid
PostPosted: Tue Feb 09, 2010 6:58 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Dec 29, 2005 9:59 pm
Posts: 5171
Location: Austin, TX
jparts shipping weight was 19lbs

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur
Top
 Profile  
 
Zack A
 Post subject: Re: Engine skid
PostPosted: Tue Feb 09, 2010 7:14 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun May 17, 2009 6:09 pm
Posts: 584
Location: Clayton, North Carolina
Ok thank you

_________________
Zack A.
2005 Rocky Mountain Ed.
W4ZWA
Top
 Profile  
 
NCC-1864
 Post subject: Re: Engine skid
PostPosted: Wed Feb 17, 2010 7:53 pm 
Offline
LOST Member
User avatar

Joined: Sat Sep 20, 2008 1:35 pm
Posts: 162
Location: 450,Canada
Zack A wrote:
Does anyone know the weight of the mopar engine skid?

what for?

_________________
Libby 2004
Modified.
Top
 Profile  
 
JL Rockies
 Post subject: Re: Engine skid
PostPosted: Thu Feb 18, 2010 10:54 am 
Offline
LOST Addict
User avatar

Joined: Mon Jan 29, 2007 12:54 am
Posts: 3865
Location: Draper, UT
NCC-1864 wrote:
Zack A wrote:
Does anyone know the weight of the mopar engine skid?

what for?


You don't want to affect your 0-60 times.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.
Top
 Profile  
 
dgeist
 Post subject: Re: Engine skid
PostPosted: Thu Feb 18, 2010 11:44 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Mar 08, 2006 6:15 pm
Posts: 2733
Location: Atlanta GA
NCC-1864 wrote:
Zack A wrote:
Does anyone know the weight of the mopar engine skid?

what for?


I know I wanted to know so I would be sure I wouldn't hurt by back lifting it... Not everyone is a speed-freak :wink:

_________________
Image
2005 Silver CRD Limited :JEEPIN:
245/75R16 GoodYear Duratracs
Fumoto drain | ProVent CCV Filter
Stanadyne FM100 filter | Cummins fuel pump
GDE Eco | SEGR | BoulderBars | FrankenLift | Frankenskids
Top
 Profile  
 
Zack A
 Post subject: Re: Engine skid
PostPosted: Thu Feb 18, 2010 4:42 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun May 17, 2009 6:09 pm
Posts: 584
Location: Clayton, North Carolina
I needed to know so I could guess on shipping :roll:

_________________
Zack A.
2005 Rocky Mountain Ed.
W4ZWA
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KJ 4X4 Discussion---2002-2007 Liberty Models

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management