i dont have a liberty any more.... but if i did i'd kill to have a pair of these.

http://4xguard.com/liberty-2002-2007/4x ... black.html

saw them at the butler jeep fest and looked really heavy duty.. increase ground clearance instead of losing it. wish they stuck out a little more but still look like a really cool product! just thought id share.

_________________
2006 Renegade. Completely stock.

Those are really slick!

That's allot of money for a set of sliders.
For the money the Rock Lizard Super Skink Sliders are hard to beat!

I like the way they hug the rocker to give more clearance. Looks better that way as well. If they can take a nice rock hit it would be worth the extra cost in my opinion.

_________________
05 CRD
97 Toyota FZJ80 12v Cummins/NV4500-build thread
96 Lexus LX 450
96 Ford F350 4x4

that's true.. the rock lizard super skinks are built like a brick crap house... but these ones will give probably an extra 3-4 inches of clearance on the sides.

i cant wait to see someone put them to the test. if i still had my KJ i'd have a set coming.

looks like they mount to the pinch weld and to the sheet metal rocker its self. should be pretty solid (depending on metal used for the sliders)

_________________
2006 Renegade. Completely stock.

This is not in anyway against JBA.

If you look at the KJ the rockers are not the lowest spot in the middle,the "frame rails" on the KJ sit 2"-3" lower then the rocker panels.Using sliders like the RL's Super Skinks does not reduce any clearance at all in that respect.

i agree.. but a lot of times by putting your tires on the rocks you miss the center and only need that extra clearance by the rockers....




if i went at that straight on i would hit my factory renegade rock rail (on the passenger side)... but with the JBA rails i would clear it no problem.

again nothing against rocklizard.. super skinks are GREAT sliders.. i just like the extra clearance and design of the JBA's

_________________
2006 Renegade. Completely stock.

Redesign is in the process on those from JBA
That set was a prototype
inside track

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Do you know of any plans for a KK version?

Sent from my Galaxy Nexus using Tapatalk 2

_________________
2008 Jeep Liberty KK, SkySlider, Tow Package, OME/Bilstein Lift, Flowmaster Delta 50, Removed Resonator, DuraTracs, In-dash CB, PIAA 520 ATPs, Dual KJ Tow Hooks
http://www.cardomain.com/ride/3974106/2008-jeep-liberty
Lost Jeeps PNW/BC Members Map

I know of a KJ who can test them out!
I like them a lot, I just wish they didn't mount inside the door jam underneath the door.(but I'm being picky)
If it was a combination of RL's mounting and 4xguards boat side style.... Ppppffffttt forget about it!

_________________
2000 Cherokee Trail Hawk
3.5" R.E Superflex Lift, R.E Quick Disconnects, R.E Rear Driveshaft, SYE, OME Steering Stabilizer, ARB Diff Covers, JW Speaker Black Heated Headlights, Mickey Thompson 16x8 wheels, 245/75r16 Toyo Open Country AT's, 15 lb Powertank

2003 KJ Sport (BLACK) 230,000+Miles (Decommissioned)

thats the truth

_________________
2006 Renegade. Completely stock.

CHRIS LIVES!

_________________
Steve
2018 RAM 1500 Rebel
2003 KJ
Mods:Exterior: Frankenlift + 2 extra rear iso, JBA UCAs, ARB Bumper w/XRC8, Safari Snorkel, 265/75/16 AT, Mopar Skids, Boulderbars, RL Gecko Sport Rack
Interior: Infinity Reference speakers, 12" Alpine Type R Sub, Alpine radio, Gauge Pods (Oil, Volts), Cobra Cb, All J Interior Rack