Okay so I called the local parts store after I discovered that I broke a tank strap and they a) don't have any in inventory, anywhere and b) they are a 100 dollars.

So I will be making 1/8" or 3/16" gas tank straps in the very near future. Who wants some?

Stainless or aluminum, or even steel I don't care.

I could make 15 3/16" straps for a 100 bucks.

100 dollars for a strap... That's rediculous.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

I made some for a guy before. Not worth the 100 bucks a pop. Took maybe 30 mins to get it all bent up and mounted. Works like a charm. We used 3/16 and painted them with some paint the Coast Guard uses for hulls. All while on duty, and didn't cost us a dime.

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Okay, so make me some lol!

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

I would if i still had that bad booty paint. I painted a metal "treasure chest" and sunk it a while in the USCG, my buddy found it while scuba diving. Had a little rust but nothing like i expected. That paint is bad.

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Im lucky i didnt rip mine out dragging my tank off stuff :S

I am thinking of going with stainless. Their is a enough stainless strapping at the shop in the "off cut" section that I can pay by weight. Then I may jut heat shrink or something for the rubber insulation a I dunno.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --