ya i searched and couldnt come up with a how to on the Elephant Hose Mod. so if anyone can help I plan on doing this today.

Thanks

Andy

_________________
daily driver:06 midnight blue jeep liberty CRD sport.
mods: CRD frakenlift, 245/75R16 grabbers on Soft 8's,All J interior rack,front hitch,custom intake,ORM, EHM GDE hot tune
141k miles

Remove existing short hose from CCV side,long 3/4 inch hose slip it on the CCV, plug existing hose to turbo, run your 3/4 inch hose down the side of the engine and wire tie it a few places to something no real hot like the exhaust, your done.

_________________
No one knows as much as all of us.

Go to this STICKY and it has pictures of the mod.

_________________
91 MB 300D 2.5L Turbo. Her's

05 MB E320 CDI. Mine

just finished thanks for the help.

_________________
daily driver:06 midnight blue jeep liberty CRD sport.
mods: CRD frakenlift, 245/75R16 grabbers on Soft 8's,All J interior rack,front hitch,custom intake,ORM, EHM GDE hot tune
141k miles

I'm running the open vent too. At 10,000 miles I pulled the intercooler hoses and looked inside - oily black slime was streaked down them. So I did the open vent mod, and 2500 miles later the hoses are still black, but dry, with no new oil deposits (I didn't clean the hoses out). There is some oily residue deposited on my skidplate at the end of the vent hose, and sometimes steam is visible in the headlights rising from the front of the vehicle when stopped. That confused me at first.