I hope the summer is treating everyone well and their A/C is working!! OK here's my question. I want to remount some switches I have for various things to the left of the dash (sitting in drivers seat) in the middle where the top and bottom halves of the dash meet. There is a small rectangular piece ( approx 6 inches long 2 or 3 tall) right there. I think i've seen pics or read mention to others mounting things there. Is it hard to remove/replace to mount things on??

As always any input positive or negative is appreciated!!

John
Reading PA

easy to remove. you can probably do it with just your fingers. I have a switch for my lights mounted there. there is a good amount of room behind it for wires and such.

_________________
-oooooo- ---Craig, L.O.S.T. #CT068103
/______\ ---http://jeep.allgris.com
O||||||||O ---'02 Sport 4x4, 5-spd,
[]--------[] ---2.5" BDS lift, 245/75/16 MT/Rs, Moab Rims, Locked and Regeared!
[]_____[] ---The list got to long, go to my web site for more!

I pulled mine off the other day just to see what was behind it, very easy to do. Just...well... pull it off.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster

that little plate is just held in with 1 or 2 pop clips. You should be fine just pulling on it.

If you cant get it with your fingers, just grab a flat head screwdriver and pry it off as it wont give enough resistance to do any damage.