It is currently Sun Nov 08, 2026 5:58 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Aluminum Skids ... Check Below
PostPosted: Tue Sep 12, 2006 9:31 am 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jul 05, 2005 8:23 am
Posts: 3544
Location: New Braunfels, Texas
I have a set of Aluminum Skids made in Israel made for the CRD's...but some of the skids will most likely fit gassers...especially the ENGINE and FUEL TANK skids. They would be very light but still strong. The 2WD guys might even like them...Post any responses to the thread below:

http://www.lostjeeps.com/forum/phpBB3/vie ... 2ac6c5996e

You will see pics and find out weights...Just another option for us...

_________________
Founder of L.O.S.T.
2006 CRD Sport

Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 12, 2006 5:09 pm 
Offline
LOST Addict
User avatar

Joined: Thu Aug 31, 2006 2:09 pm
Posts: 1297
Location: Minneapolis, MN
If they fit the gas models I might be intrested, keep the info going.

_________________
"I'm the guy who does his job, you must be the other guy"
02 Black UNlimited Edition 4X4 Select Trac Liberty Towing/Off Road Packages 245/75/16 on black Moabs
RL diff cover/Super Skink sliders, Rusty's 2.5" Coil Lift w/ clevis lift, Roof basket W/Hella FF75...
On the prowl for an M416/M101/M100 trailer
L.O.S.T. Member 2877


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 12, 2006 6:17 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Thu Jul 07, 2005 8:28 pm
Posts: 683
Location: Blairstown, NJ
I saw them at SEMA off road, I can contact them and get prices, really neat, will fit the 2002 and up. They have a bunch of other stuff for the TJ, and I think they were going to look into a KJ bumper. Real nice people.

They havd this real cool seat suspension system for the TJ, just like in the big rigs.

If I remember they were expensive.

Al

_________________
One Ruby, One Grand Cherokee, One YJ, One disassembled CJ, one Chevy Mason dump, one hotrod IH Pick-up, couple of antique tractors.
Former owner of a 5.5 inch lifted KJ


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 12, 2006 6:24 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Apr 04, 2006 4:31 pm
Posts: 625
Location: Elizabeth City, North Carolina
I can't imagine they would last very long, or hold up to too much abuse.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 12, 2006 6:29 pm 
Offline
Coal Country Wheelin
Coal Country Wheelin
User avatar

Joined: Wed Nov 02, 2005 12:17 am
Posts: 945
Location: Goldsboro, NC
Mutt wrote:
I can't imagine they would last very long, or hold up to too much abuse.


Pretty much what i was thininking too. Aluminum will just break, not bend.

_________________
LIBERTY or DEATH

2005 Sport with "STUFF"

Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed Sep 13, 2006 12:37 am 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jul 05, 2005 8:23 am
Posts: 3544
Location: New Braunfels, Texas
I found some prices on a German site...posted in the original thread in the CRD forum. ( Prices are subject to change of course ) The skids will most likely fit all the KJs...at least the Engine and Fuel...not sure about the crossmember with the Tranny/Transfercase Skid. The steprails/sliders are really nice ( total weight about 43#...these have steel sliders/steps with aluminum mounting hardwear and an aluminum/diamond plate step cover ).

These are not for everybody, but if you are just 4wheelin ( not RockKrawling like I used to do with my 2002), these definitely save weight ( all three together are less than 80# ) and protect the underside from most dangers...including stuff on the roads.

They do have some really nice suspension seats...might work really nice in a KJ since our seats are mediocre at best.

_________________
Founder of L.O.S.T.
2006 CRD Sport

Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph


Top
 Profile  
 
 Post subject:
PostPosted: Wed Sep 13, 2006 2:14 am 
Offline
Lifetime Member & Advertising Vendor
Lifetime Member & Advertising Vendor
User avatar

Joined: Thu Jul 14, 2005 11:46 pm
Posts: 1251
Location: Sparta
Mutt wrote:
I can't imagine they would last very long, or hold up to too much abuse.


I agree. I really like the design, they are very sharp looking skids, but having seen what some real serious rock crawling has done to 3/16" steel gas tank and belly skids, those will not last. Saving a little weight will not save your drivetrain or gas tank when the going gets tough. Those skids will crack and fail right at those brake points. And aluminum does not slide on rocks very well, they snag and hang up.

I think if they made them out of 3/16" steel, maybe A50, they would have a great setup. In its current form, you will shred your money all over the rocks on the trail. If you are prerunning in the sand, then aluminum skids are good because they won't be abused as much and they are light weight, but I don't see anyone running the baja in a 4000lb KJ anytime soon. The most practical material for the KJ in the states is steel. How much difference is an extra 50 or even 100lbs going to make to a KJ? If you really want to save some weight, take off all the doors, otherwise load up on all the armor you can get. For anyone running trails that get any kind of rock contact, these probably wouldn't be a good idea. If you just like the look, or only hit the backwoods forest roads to get to a good fishing or hunting spot, then they should be all the armor you really need.

Sorry for the long post, just my thoughts.

Edit: Oops, just seen that Darby already agrees that they are not ideal for hardcore rockcrawling. :wink:


Top
 Profile  
 
 Post subject:
PostPosted: Wed Sep 13, 2006 1:24 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jul 08, 2005 12:31 am
Posts: 1979
Location: Lower NY
Quote:
I found some prices on a German site...posted in the original thread in the CRD forum.

Have that link handy?

_________________
My pics!!
'03 Rennie w/all Tupperware
Custom Roof Basket
Mopar Tubular Brush Guard
Garmin GPS V & Laptop w/Nav software
RAM products laptop mount
Maglite w/mount
Rear cargo bay tool cabinet
AllJs Rear Shelf
Rear receiver
250k miles!
LOST #CR051230


Top
 Profile  
 
 Post subject:
PostPosted: Wed Sep 13, 2006 1:27 pm 
Offline
LOST Addict
User avatar

Joined: Fri May 19, 2006 4:27 pm
Posts: 2130
Location: Dayton, OH
Cacher123 wrote:
Quote:
I found some prices on a German site...posted in the original thread in the CRD forum.

Have that link handy?


Ditto on that, the only prices I found were a bit higher than what you had, not sure if it was a german site or not though.

http://www.eurofourwheeler.com/pdf_listino/hi.pdf

or just go to www.eurofourwheeler.com and browse from there.

_________________
It may be that your only purpose in life is to serve as a warning to others.

06 CRD Sport
Built 5/11/06
Jeep Green
Rocklizard diff cover
V6 Airbox


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com