It is currently Thu Oct 29, 2026 5:39 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 19 posts ] 
Author Message
 Post subject: Mud Problem
PostPosted: Sun Oct 01, 2006 8:38 pm 
Offline
LOST Newbie

Joined: Sun Oct 01, 2006 8:26 pm
Posts: 3
I have a lot of dry packed mud in my engine skid. I have tryed pulling a it out but have had no luck. I have also tryed to unbolt it but can't get the bolts to budge. Any recomednations on what I should do. The skids are factory stock.

Thanks


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 01, 2006 8:40 pm 
Offline
LOST Junkie

Joined: Mon Jan 30, 2006 8:24 pm
Posts: 677
I dont have my skids yet (hopefull this week), but I'm assuming that the bolts are regular and not anything like Torx or that kinda thing. In which case, my best advice would be to find someone who has an impact wrench to get it off.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 01, 2006 8:43 pm 
Offline
LOST Newbie

Joined: Sun Oct 01, 2006 8:26 pm
Posts: 3
What is an impact wrench?


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 01, 2006 8:47 pm 
Offline
LOST Junkie

Joined: Mon Jan 30, 2006 8:24 pm
Posts: 677
Its a pneumatic wrench that is powered by an air compressor. Youll see them getting used in shops and stuff. I'm looking for an example online right now to show you give me a second and I'll post it.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 01, 2006 8:50 pm 
Offline
LOST Junkie

Joined: Mon Jan 30, 2006 8:24 pm
Posts: 677
Image

I'm assuming you dont have a big air compressor, so I wouldnt recommend getting one right this second unless you've got some money burning a hole in your pocket.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 01, 2006 9:22 pm 
Offline
This member has been Banned

Joined: Thu Mar 16, 2006 7:18 pm
Posts: 2301
Location: Harahan LA (the burbs)
to get the mud out of the skid I would put the hose from your house in the skid from the front and turn it on full open
let it get good and wet and keep working on it until it all comes out

I would not try to get the bolts out with out puting some kind of penitrating oil on the threads and letting it sit then put some more and still more
if you try to force them out you may break them or mess up the nut zert things that hold the skid on

I will be working on a fix for the "shovel" on mine and I will post pix but that won't be until maby next year


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 01, 2006 9:23 pm 
Offline
I live here
I live here
User avatar

Joined: Sun Jul 10, 2005 6:59 pm
Posts: 5839
Location: Aurora, CO
They sell electric impact wrenches also.

_________________
===
New KJ Gear - Desert Armor Flak

2004 Renegade Light Khaki - 4" JBA Lift - Rock Lizard Products: Komodo Dragon Rear Bumper, Prototype Winch-mount Front Bumper, Super Skink Sliders - All J's Super Tranny Skid II - 31" Firestone Destination AT's on Moab wheels - Cobra 75W CB w/ stock Antenna mod

[b]Retired, US Military


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 01, 2006 9:33 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8052
Location: Kentuckeeee
Mines been full of mud and Ive never had a problem with just washing it out with a water hose.. :wink:

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 01, 2006 9:33 pm 
Offline
LOST Junkie

Joined: Mon Jan 30, 2006 8:24 pm
Posts: 677
Tokyojoe wrote:
They sell electric impact wrenches also.


That I did not know. Learn something new everyday on lost. :)


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 01, 2006 10:07 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Mar 27, 2006 8:27 pm
Posts: 901
Location: Walkerton, IN
Can I ask how you got mud in there??? :lol:

I'd suggest a pressure washer if you have one around...seems to work good on hard clay that hardens on things. We use simple green and a pressure washer to get the hard stuff off our motocross bikes.

_________________
02' Frankenlifted White Sport on 31" TrXus M/Ts

89' 2 Dr. Khaki XJ- Waggy 44's, 4.88s, 35's, 3-link on 5.5" coils.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 01, 2006 11:24 pm 
Offline
LOST Addict
User avatar

Joined: Fri Jul 08, 2005 1:57 am
Posts: 1339
Location: Richmond, Virginia
Find some reason to take it to the dealership to have some kind of work done on it. They clean it out for ya for free. Then they exagerate on how much mud they removed. One time the told me it filled a 20 gallon drum. :shock:

_________________
Richard~Mid Atlantic VA Rep.
NCBBA/Mid Atlantic Jeepers/UFWDA Member
Mid-Atlantic & Carolina LOST #236236
2006 TJ Solar Yellow Rubicon
Lockers, Springs, Skids, Headers, Snorkel,
Exhaust Work, 4.5 Long Arm, Warn M8000
315/75/16 Nitto Terra Grapplers Moab's/SpiderTrax, 6000k HID, IPF H4


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 02, 2006 12:40 am 
Offline
LOST Member
User avatar

Joined: Sat Jul 09, 2005 2:36 am
Posts: 319
Location: The Dalles, Oregon
Are you sure they were exagerateing? :twisted:


My electric impact & 18v nut driver are my best friends when working on Jeeps :D .

_________________
LOST in Oregon

'04 KJ sport, Rustys spacers front+ Skyjacker coils rear,16"x8" Rubi's LT245/75R16 BFG A/T, Mopar skids & hooks, Reese Hitch.
'96 XJ sport, Rustys lift NOW 4.25" with arms, NOW 32x11.5R15 muds, Rustys hooks, Valley Hitch.
http://www.cardomain.com/ride/2273596
'78 Z-28 & '96 Metro


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 02, 2006 9:30 am 
Offline
LOST Addict

Joined: Thu Mar 30, 2006 11:50 am
Posts: 1254
Location: Upstate NY
After spraying the underside with a hose to get as much out as possible I just get under there with a trowl (like you would use in a garden) and that usually gets it all out. Seems like the front skid is a mud scoop.

_________________
05 BLACK KJ - 42RLE & NP242
Skids, Hooks, Bent Rock Rail, Lifted, A/T's, etc.
NY and PA and Florida ONF Special Custom Organic Trail Rash


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 02, 2006 2:38 pm 
Offline
I live here
I live here
User avatar

Joined: Sun Jul 10, 2005 6:59 pm
Posts: 5839
Location: Aurora, CO
desertkj wrote:
Tokyojoe wrote:
They sell electric impact wrenches also.


That I did not know. Learn something new everyday on L.O.S.T.. :)


Jeep even has its own electric impact wrench. Check out their catalog. Not sure if it is on the online catalog.

_________________
===
New KJ Gear - Desert Armor Flak

2004 Renegade Light Khaki - 4" JBA Lift - Rock Lizard Products: Komodo Dragon Rear Bumper, Prototype Winch-mount Front Bumper, Super Skink Sliders - All J's Super Tranny Skid II - 31" Firestone Destination AT's on Moab wheels - Cobra 75W CB w/ stock Antenna mod

[b]Retired, US Military


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 02, 2006 4:56 pm 
Offline
LOST Newbie

Joined: Sun Oct 01, 2006 8:26 pm
Posts: 3
I have tryed to get it with a power washer but no luck. Most of it is packed under the front differantal. I have had it to the dealership twice since and they have not done anything about it.

Thanks for all the replies


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 02, 2006 5:28 pm 
Offline
LOST Member
User avatar

Joined: Mon Jan 23, 2006 7:58 pm
Posts: 480
Location: New Orleans
Turn the sprinler on and park on top of it. Let it "soak" for a while. That should loosen some of that mud up. Thanks to Jason Thompson for that tip. It works well.

_________________
'03 Sport 4x4 140k miles. Yeah, she's had some work done


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 05, 2006 3:39 pm 
Offline
LOST Member
User avatar

Joined: Tue Jul 26, 2005 2:56 pm
Posts: 267
Location: Pinckney, MI
uvalax236 wrote:
Find some reason to take it to the dealership to have some kind of work done on it. They clean it out for ya for free. Then they exagerate on how much mud they removed. One time the told me it filled a 20 gallon drum. :shock:


Yea, the'll do it for you...but they charged me 50 bucks for it. After they had already done it so I couldn't say NO to them... :evil:

_________________
LOST # 590
Not Jeepless anymore :)
97 TJ Sahara, 2.5" OME, SYE + CV driveshaft, JKS discos, some armor, some lights...


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 09, 2006 11:25 am 
Offline
Lifetime Member
Lifetime Member

Joined: Fri Jul 08, 2005 1:12 pm
Posts: 270
Location: Lawrence, MA
Does it look like this? (click for larger view).

Image

Image

_________________
PC Tim
Lawrence, MA
L.O.S.T. Lifetime Member TC055700
2004 Sport with just enough to get me in trouble 8)
http://picasaweb.google.com/TRCorcoran


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 09, 2006 12:38 pm 
Offline
I live here
I live here
User avatar

Joined: Sun Jul 10, 2005 6:59 pm
Posts: 5839
Location: Aurora, CO
The mud is actually a great benefit.......it soaks up any spilled oil when the service department changes your oil.

_________________
===
New KJ Gear - Desert Armor Flak

2004 Renegade Light Khaki - 4" JBA Lift - Rock Lizard Products: Komodo Dragon Rear Bumper, Prototype Winch-mount Front Bumper, Super Skink Sliders - All J's Super Tranny Skid II - 31" Firestone Destination AT's on Moab wheels - Cobra 75W CB w/ stock Antenna mod

[b]Retired, US Military


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 19 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com