Tires on Frankenlift lift Kit

jeepguyvt · **Posted:** Mon Oct 02, 2006 4:42 pm

I am looking to purchase either the rockfather 1 or 2 lift kit for my 2004, and i was wondering the largest size tires i could safely put on with that kit. I have seen a liberty on here with 245/75/16 BFGs on it, and i found some goodyears that same size that i am interested in. I also found some 265/75/16 mickey thompsons, but i am not sure if they will clear. I know the tire question has been posed many times, that is why i have waited to ask until i knew specific sizes i was looking at.

thanks for the help
evan

raceinfan · **Posted:** Mon Oct 02, 2006 5:00 pm

First off Welcome

& make sure you check out the L.O.S.T. Northeast club section & sign in

Now to answer your question most all here that do run a lift have 245/75 there may be some rubbing issues but thats fixed by first hammering down the pinch weld & maybe some fog light door cutting,sorry don't know much about that lift most here run the Franken lift or Rusty's lift there may be a couple here that have it but I'm unsure

keep the peace · **Posted:** Mon Oct 02, 2006 5:03 pm

i agree with the pinch weld, if you wanted to run those 265's though, you might have to do a clevis lift and maybe some trimming?? Not to sure, haven't tried those size yet... :mrgreen:

jeepguyvt · **Posted:** Mon Oct 02, 2006 5:05 pm

yeah, ive read alot about the frankenlift now, heard good things, considering that as my lift now. does anyone here run the 245/75/16 goodyear wrangler mountainers(MTR)? any opinions on them?

CaKJFreedom · **Posted:** Mon Oct 02, 2006 6:23 pm

What kind of terrain are you planning on running in? MT/R's are great for rocks but there are better tires out there for mud.

eggwhite93 · **Posted:** Mon Oct 02, 2006 8:42 pm

There are alot of people on here running the 245/75/16 MT/Rs. You should be fine with them. I have them as well.

Gringo Loco · **Posted:** Mon Oct 02, 2006 9:42 pm

I just got my MT/Rs on Sat. They look awesome, I did have to trim the front air dam with my dremel. I still think I have to do some more trimming. The good news is that they don't seem to rub the pinchweld at all.

Tires on Frankenlift lift Kit

Who is online