It is currently Wed Nov 04, 2026 5:19 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: Rear Defroster coil fell off...
PostPosted: Sat Dec 02, 2006 2:29 am 
Offline
LOST Addict
User avatar

Joined: Tue Jul 18, 2006 5:08 pm
Posts: 1645
Location: St Charles IL
I noticed as i was just driving home that my rear defroster wasnt working. it seems that one of the coils snapped off where the metal prong was secured to the window. is there anyway to re-attach this myself or would this be a dealer thing?
i'll have pics in the morning to go along with my poor explanation (its too cold and dark out to get them now)


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 02, 2006 2:36 am 
Offline
Master of the Blender
User avatar

Joined: Thu Jul 07, 2005 4:21 pm
Posts: 2804
Location: Margaritaville
If its just that the plastic connector came off the metal tab then it should just snap right back on; I just went out to mine and took it off to verify this. If the tab came off the window or the plastic end on the coiled wire is broken so that it won't connect securely then it will be a dealer item.

_________________
Kevin
AD5VG
Just another red Jeep in the world...
L.O.S.T. #KB051963


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 02, 2006 2:38 am 
Offline
LOST Addict
User avatar

Joined: Tue Jul 18, 2006 5:08 pm
Posts: 1645
Location: St Charles IL
from what i could make out in the dark it looked like the glue (?) holding the tab to the window was the source of the snapping off of the tab in question...


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 02, 2006 2:40 am 
Offline
Master of the Blender
User avatar

Joined: Thu Jul 07, 2005 4:21 pm
Posts: 2804
Location: Margaritaville
callaway wrote:
from what i could make out in the dark it looked like the glue (?) holding the tab to the window was the source of the snapping off of the tab in question...

Should be solder holding it on. Probably an easy fix for the dealer.

_________________
Kevin
AD5VG
Just another red Jeep in the world...
L.O.S.T. #KB051963


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 02, 2006 2:42 am 
Offline
LOST Addict
User avatar

Joined: Tue Jul 18, 2006 5:08 pm
Posts: 1645
Location: St Charles IL
thanks - i'll check it out fully in the morning when the lights better and the thought process is a little clearer. just wanted to make of note so i could get some ideas and not forget about it


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 02, 2006 2:59 am 
Offline
Master of the Blender
User avatar

Joined: Thu Jul 07, 2005 4:21 pm
Posts: 2804
Location: Margaritaville
No prob. I know what ya mean about it being cold - its a chilly 49 outside right now, and supposed to get all the way down to 41! Guess winter is finally making its way to the Valley of the Sun :P

_________________
Kevin
AD5VG
Just another red Jeep in the world...
L.O.S.T. #KB051963


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 02, 2006 11:17 am 
Offline
clean machine
clean machine

Joined: Tue Oct 18, 2005 11:52 pm
Posts: 1211
corwyyn wrote:
No prob. I know what ya mean about it being cold - its a chilly 49 outside right now, and supposed to get all the way down to 41! Guess winter is finally making its way to the Valley of the Sun :P


Hehehe, good one. :D J/K, that would seem HOT to me right now... :D


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 02, 2006 2:47 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jul 18, 2006 5:08 pm
Posts: 1645
Location: St Charles IL
corwyyn wrote:
No prob. I know what ya mean about it being cold - its a chilly 49 outside right now, and supposed to get all the way down to 41! Guess winter is finally making its way to the Valley of the Sun :P


when i first posted that last night it was close to 20*... go winter!

it looks like it was the solder that came off the window. i took pictures with my phone and am waiting for them to show up in my email...

how much would that be to fix @ the dealer?


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 02, 2006 3:04 pm 
Offline
Master of the Blender
User avatar

Joined: Thu Jul 07, 2005 4:21 pm
Posts: 2804
Location: Margaritaville
In my opinion probably way too much, but I would hate to pull out the soldering iron myself and ruin it...

I'd guess if you're really lucky it'll be around $50, if not I wouldn't be surprised to see them charge around $100 (although I hope not).

_________________
Kevin
AD5VG
Just another red Jeep in the world...
L.O.S.T. #KB051963


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 02, 2006 5:03 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jul 08, 2005 12:31 am
Posts: 1979
Location: Lower NY
These are fixable for under $10. Do a search on this site as this was answered awhile back. there are various products to fix this. Sorry, can't remember when the post was originally.

Edit: found it.
It was under defogger.

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=2785&highlight=defogger

_________________
My pics!!
'03 Rennie w/all Tupperware
Custom Roof Basket
Mopar Tubular Brush Guard
Garmin GPS V & Laptop w/Nav software
RAM products laptop mount
Maglite w/mount
Rear cargo bay tool cabinet
AllJs Rear Shelf
Rear receiver
250k miles!
LOST #CR051230


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 02, 2006 10:54 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jul 18, 2006 5:08 pm
Posts: 1645
Location: St Charles IL
thanks very much!


Top
 Profile  
 
 Post subject:
PostPosted: Sun Dec 03, 2006 2:41 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jul 08, 2005 12:31 am
Posts: 1979
Location: Lower NY
Troubleshooting/Repair Guide:

http://www.frostfighter.com/ff_troubleshoot.htm

_________________
My pics!!
'03 Rennie w/all Tupperware
Custom Roof Basket
Mopar Tubular Brush Guard
Garmin GPS V & Laptop w/Nav software
RAM products laptop mount
Maglite w/mount
Rear cargo bay tool cabinet
AllJs Rear Shelf
Rear receiver
250k miles!
LOST #CR051230


Top
 Profile  
 
 Post subject:
PostPosted: Sun Dec 03, 2006 10:52 pm 
Offline
LOST Member
User avatar

Joined: Sat Jul 09, 2005 2:36 am
Posts: 319
Location: The Dalles, Oregon
happend to ours last year, still onder warranty, dealer just replaced the rear glass.

_________________
LOST in Oregon

'04 KJ sport, Rustys spacers front+ Skyjacker coils rear,16"x8" Rubi's LT245/75R16 BFG A/T, Mopar skids & hooks, Reese Hitch.
'96 XJ sport, Rustys lift NOW 4.25" with arms, NOW 32x11.5R15 muds, Rustys hooks, Valley Hitch.
http://www.cardomain.com/ride/2273596
'78 Z-28 & '96 Metro


Top
 Profile  
 
 Post subject:
PostPosted: Sun Dec 03, 2006 11:23 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jul 18, 2006 5:08 pm
Posts: 1645
Location: St Charles IL
i went out to pepboys and bought a kit to repair it, but the kit says that it needs to be at least 50* for the copper epoxy to cure correctly. wont be that hot anytime soon here (its currently 12*)



this is gonna sound really dumb, but how do i know if im under warranty ?


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 3:48 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jul 08, 2005 12:31 am
Posts: 1979
Location: Lower NY
Quote:
the kit says that it needs to be at least 50* for the copper epoxy to cure correctly.

Blow Dryer.

_________________
My pics!!
'03 Rennie w/all Tupperware
Custom Roof Basket
Mopar Tubular Brush Guard
Garmin GPS V & Laptop w/Nav software
RAM products laptop mount
Maglite w/mount
Rear cargo bay tool cabinet
AllJs Rear Shelf
Rear receiver
250k miles!
LOST #CR051230


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 9:12 am 
Offline
LOST Addict
User avatar

Joined: Tue Jul 18, 2006 5:08 pm
Posts: 1645
Location: St Charles IL
Cacher123 wrote:
Blow Dryer.



i don't want to to have to stand there for several hours w/a blow dryer. it takes 24 hrs to cure entirely


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 12:20 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun May 21, 2006 9:44 am
Posts: 164
Location: New Jersey
Your warranty is 3 years or 36,000 miles.

_________________
Marc
2005 RENEGADE
lift and tires
its a start


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com