It is currently Fri Nov 06, 2026 7:03 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: keep getting misfire codes
PostPosted: Sat Dec 02, 2006 11:28 am 
Offline
LOST Member

Joined: Thu Oct 05, 2006 9:29 pm
Posts: 132
Location: Lenoxville, PA
last time it was cyl. 5 now it is cyl 6 and it still hesitates to start and sometimes it fires right up. changed the plugs and it still does it, cant get it in to satan till next friday.

and it is really pissing me off to have a newer vehical act like a 20 year old carb'd vehical. any ideas?

_________________
2003 Renegade 4X4
3.7l
roof lightbar
front brush guard
everthing else is stock for now


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 02, 2006 11:35 am 
Offline
LOST Newbie
User avatar

Joined: Fri Mar 31, 2006 12:00 pm
Posts: 87
Location: PEI
Mine seems to be doing the same thing lately, only after I parked it in my shop for the day to thaw it out. (-40 weather) so I added some gasline antifreeze, and some premium fuel, and it seemed to worked. You may have some condensation in your fuel.

Is it a misfire code on #3? cold weather starts seem to set that code when I'm not plugged in.

_________________
2003 Timberline green KJ, K&N Intake, vortex exhaust , Jet chip,Panasonic in dash DVD / Kicker Audio system,sirius sat radio, Light force 170's, Garmin GPS, Firestone air bags, Clear corner lights
http://www.cardomain.com/ride/2421676


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 02, 2006 3:54 pm 
Offline
LOST Member

Joined: Thu Oct 05, 2006 9:29 pm
Posts: 132
Location: Lenoxville, PA
was on 5 now it's on six i added some sea foam 1 tank ago and it seemed to do nothing to help. it hasent been cold here till today. yesterday was 70+ here in PA. today is a bit colder (40's) and it started up fine. seems to be a warm start issue. but i am just guessing that one. :?

_________________
2003 Renegade 4X4
3.7l
roof lightbar
front brush guard
everthing else is stock for now


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 8:34 pm 
Offline
LOST Addict

Joined: Sat Jul 09, 2005 1:46 pm
Posts: 1195
When you changed your plugs, what did the front 2 look like? Where they burnt, or did they have red fluid on them? The 3.7 has problems towards the front.

_________________
June 2001 Liberty Limited 4X4
Frankenlift II Premium, Al's Upper Arms, 245/75R16 C Silent Armors on Moabs, RL Skink Super Sliders, Rear DTT, Riddler Diff Cover, Fastman Throttle Body, Profinish-Proglass Hood, Borla Dual Outlet Exhaust, TransGo Reprogramming Kit, APS Stall Converter, 4.10 Gears, B&G Chrysler PCM, Lots of Line-X, etc...


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 05, 2006 11:30 am 
Offline
LOST Member

Joined: Sun Dec 18, 2005 11:55 pm
Posts: 103
Location: St. Petersburg, FL.
Another thing that I would look at is the timing. How many miles does it have on it? Have you replaced the plugs, if so at what miles did you do it? Try putting premium in it to see if it helps. If it does then your timing is probably off.

_________________
'05 Liberty Sport
Bright Silver Metallic
Mastercraft Courser A/T tires
The trail always looks easier from the top of the hill.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 05, 2006 11:30 am 
Offline
LOST Member

Joined: Sun Dec 18, 2005 11:55 pm
Posts: 103
Location: St. Petersburg, FL.
Another thing that I would look at is the timing. How many miles does it have on it? Have you replaced the plugs, if so at what miles did you do it? Try putting premium in it to see if it helps. If it does then your timing is probably off.

_________________
'05 Liberty Sport
Bright Silver Metallic
Mastercraft Courser A/T tires
The trail always looks easier from the top of the hill.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 05, 2006 11:54 am 
Offline
LOST Member

Joined: Wed Oct 11, 2006 12:00 pm
Posts: 278
Location: Waterford, MI
KJ_Dave wrote:
Another thing that I would look at is the timing. How many miles does it have on it? Have you replaced the plugs, if so at what miles did you do it? Try putting premium in it to see if it helps. If it does then your timing is probably off.


Timing in handled by the computer based on the crank position sensor and cannot be changed. Well it could be changed, but you'd have to reflash the computer.

My experience with faulty crank position sensors is that they fail completely and the vehicle won't even run.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 05, 2006 1:34 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jul 05, 2005 8:23 am
Posts: 3544
Location: New Braunfels, Texas
Well this is a little off the subject of misfiring...but...if you ever get a chance to remove your valve covers, I think you will be surprised by the "sludge" that will be there. My 2002 and a wrist pin go bad that was hard to diagnos. I removed the valve cover on the side that I suspected was making the tapping noise and could not believe the build up. On top of that two valve springs were cracked. Basically the same condition of the other side when inspected.

_________________
Founder of L.O.S.T.
2006 CRD Sport

Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com