2 hoses on center of intake?

O_Dogg · **Posted:** Fri Nov 24, 2006 11:23 am

what are they for? 2 black hoses in the middle of the engine go to the block, i have a cracked hose on the drivers side.

Hood297 · **Posted:** Fri Dec 01, 2006 1:18 pm

Crankcase Breathers. Important, if youve got a crack then your getting dirt, debris in the crankcase. Which may lead to dirty oil, and so on....

1300ZUK · **Posted:** Sun Dec 03, 2006 12:37 am

yeah one of mine cracked and popped off, i wonder how long i drive with it like that :cry:

O_Dogg · **Posted:** Sun Dec 03, 2006 8:52 am

do you have to get it from satan or can you replace both of them with double walled braided reinforced hose?

saxdogg · **Joined:** Fri Jun 02, 2006 7:26 pm **Posts:** 199

I've posted this on several of these threads....but a three feet section of generic heater hose in the same diameter will work fine for most of those. CHEAP! Just cut to fit.

Hood297 · **Posted:** Sun Dec 03, 2006 5:37 pm

yea any hose will work, it isnt under hardly any pressure with my new air intake i had a problem because the breather tubes on the intake were a different diameter than the stock ones, so i just went to west marine and got an barbed connecter. works just fine and only took about 2 min. to put it.

2 hoses on center of intake?

Who is online