Has any one looked in to replacing just the boot?
I guess I am thinking I want to do like I did with the TJ and replace all the dust boots that I can befor I have a problem
I know that I can get poly boots for the TJ wich are easy to install and will hold up to syn. grease do they make them for the KJ

Get box of boots, they are a set, upper and lowers

Part number 513102 G (black) or place an R and get red, from Energy Suspension

They should do the trick. Just slip thme over the existing boot.

Al

_________________
One Ruby, One Grand Cherokee, One YJ, One disassembled CJ, one Chevy Mason dump, one hotrod IH Pick-up, couple of antique tractors.
Former owner of a 5.5 inch lifted KJ

Thanks

PN's make life easy
I did not see them listed any where yet but I have not looked all that hard

They are listed for the 70-80 Chrysler large car ball joints, as are the K772 I use in my arms.

Al

_________________
One Ruby, One Grand Cherokee, One YJ, One disassembled CJ, one Chevy Mason dump, one hotrod IH Pick-up, couple of antique tractors.
Former owner of a 5.5 inch lifted KJ

Al,
Will these fix the gap between the boot and the joint bung on your arms? I have been looking to find a boot that will not fold over leaving a gap.
Thanks,

_________________
'03 Sport
Grand Cherokee TCM, Skids, Superwinch EPi 9.0 in cradle mount with 125' 5/16 Viking Trail Line, Mopar Rock Rails, Trac-Loc Diff, Frankenlift in front and Skyjacker/JBA springs out back, Monroe Reflex Shocks in rear, JBA Gen 4.5 Upper Control Arms, Moog LBJ's, 245/75/16 Goodyear Wrangler Duratracs.

They should, I have been using them on the last 10 sets, seem to work well.

_________________
One Ruby, One Grand Cherokee, One YJ, One disassembled CJ, one Chevy Mason dump, one hotrod IH Pick-up, couple of antique tractors.
Former owner of a 5.5 inch lifted KJ