moose wrote:
OK, I don't want to do it now, but when she does let me get a Rubicon, how tough would it be to convert the 6spd to an auto so the wife can wheel too? I know it'll go 4 figures.
not real bad if you find a "donor" for the plastic
you will need the trany
the mount may be different so you may need that
you will need any wires that go from the auto to the inside ,should be just plug and play on this end
and you will need to reflash your ecu (computer) to work with the auto
when all I had to wheel was a p/u with a 5 speed the wife learned to drive that
anybody can learn to do it but it will take patience on your part and a willingness to learn on hers
The easy way to teach some one to drive stick is to go to a empty parking lot nd have them start and stop about 1000 time until they learn how to do it
or you can do like I did go out with only the ride with the stick then get slam drunk and tell her that she needs to drive home
you will have a good "talk" in the morning but after that she will be able to drive a stick no problem