CRD now has a bad PCM

MooseMeat · **Posted:** Wed Feb 07, 2007 2:51 pm

The CRD is at the dealers again, they were trying to pin my stalling and running like crap problem on bad fuel I told them it started and ran fine at -26 below, now it's 12 above and there something wrong with the fuel, I don't think so same tank.

In the shop it went, now I'm waiting for a new Power Control Module. I think the tech fried the PCM but who knows.

They take good care of me, but damm fix it once and for all please.

BVCRD · **Posted:** Wed Feb 07, 2007 2:53 pm

MooseMeat wrote:

The CRD is at the dealers again, they were trying to pin my stalling and running like crap problem on bad fuel I told them it started and ran fine at -26 below, now it's 12 above and there something wrong with the fuel, I don't think so same tank.

In the shop it went, now I'm waiting for a new Power Control Module. I think the tech fried the PCM but who knows.

They take good care of me, but damm fix it once and for all please.

They just about fried mine last summer when it went in for the BCM recall battery thing. Took them 30 minutes to reboot it.

MooseMeat · **Posted:** Sat Feb 10, 2007 10:34 am

They tell me that the PCM wasn't fried but wouldn't take the F37 flash compleatly. Told me part of it took and part of it was still the old program and they could not re-flash it kept giving then a error. :roll:

Well replacing thePCM did make a huge differance, runs smooth now and it's not stalling anymore so I would have to guess that was it.

BVCRD · **Posted:** Sat Feb 10, 2007 10:35 am

MooseMeat wrote:

They tell me that the PCM wasn't fried but wouldn't take the F37 flash compleatly. Told me part of it took and part of it was still the old program and they could not re-flash it kept giving then a error. :roll:

Well replacing thePCM did make a huge differance, runs smooth now and it's not stalling anymore so I would have to guess that was it.

Good deal Moose.

DarbyWalters · **Posted:** Sat Feb 10, 2007 10:42 am

Well if "MooseMeat" ends up with "tranny shutter"...he must change his moniker to "MooseJerky" :lol:

MooseMeat · **Posted:** Sat Feb 10, 2007 11:44 am

Well DarbyWalters. Moose Jerky

hmmmm wouldn't that be more of a Jerky Moose?

I think I might have wrote this someplace else but after the F37, the shudder went from once or twice a day to once every 2 or 3 weeks, and way less severe than it was. More of a studder than a shudder. They are blaming that on the PCM also.

BVCRD · **Posted:** Sat Feb 10, 2007 11:48 am

MooseMeat wrote:

Well DarbyWalters. Moose Jerky

hmmmm wouldn't that be more of a Jerky Moose?

I think I might have wrote this someplace else but after the F37, the shudder went from once or twice a day to once every 2 or 3 weeks, and way less severe than it was. More of a studder than a shudder. They are blaming that on the PCM also.

You got a F37 on your 2006? Whay is your build date?

MooseMeat · **Posted:** Sat Feb 10, 2007 12:08 pm

08-05

Hmmm had to run out to look.

BVCRD · **Posted:** Sat Feb 10, 2007 12:16 pm

MooseMeat wrote:

08-05

Hmmm had to run out to look.

OK. I gottch ya. You have one of the first 2006's. I think the cut off date for the newer TC version was Oct '05 and later. You got the 2005 stuff in your 2006.

hokiecb · **Joined:** Tue Oct 31, 2006 9:23 pm **Posts:** 46

My '06 was in yesterday and today for F37. Had no problems before, but the dealer talked me into doing it

Called at 2.. they told me to pick it up at 5, everything done but the flash. Cell phone rings on the way to the dealership... sorry man, we fried your PCM doing the flash.

Seems like i've read that happened to someone or several people before during F37?

BVCRD · **Posted:** Tue Feb 20, 2007 10:34 pm

hokiecb wrote:

My '06 was in yesterday and today for F37. Had no problems before, but the dealer talked me into doing it

Called at 2.. they told me to pick it up at 5, everything done but the flash. Cell phone rings on the way to the dealership... sorry man, we fried your PCM doing the flash.

Seems like i've read that happened to someone or several people before during F37?

Pretty easy to do with these, Fragile things. Not just in KJ's either.

Marlon_JBT · **Posted:** Wed Feb 21, 2007 2:41 am

I have an August 2005 build date too. I wonder how much '05 stuff I have?

CRD now has a bad PCM

Who is online