What do I need to do? My tires are rubbing on the front and rear of the well. It's a 2002 Sport.

A good sharp blade will do wonders on the front. Mind was rubbing forever by the fog lights. Just cut that puppy off. For the rear have you pounded down the pinch weld? (the part that sticks out like a little shark fin aiming at your tire). There's a coupld methods. Basically cut plastic, hit with a bfh to fold the weld over, reattach plastic or paint over with with an undercarriage spray. Good luck and let us know how it goes.

_________________
Nanette

03 Freedom with some neat stuff done to it that I learned about here.

OK so what exactly do I cut off in the front? And after I cut whatever needs to be cut off, what do I do then?

Here you go this might help you out.

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?p=162361&highlight=pintch+weld#162361

_________________
"I'm the guy who does his job, you must be the other guy"
02 Black UNlimited Edition 4X4 Select Trac Liberty Towing/Off Road Packages 245/75/16 on black Moabs
RL diff cover/Super Skink sliders, Rusty's 2.5" Coil Lift w/ clevis lift, Roof basket W/Hella FF75...
On the prowl for an M416/M101/M100 trailer
L.O.S.T. Member 2877

I did a write up years ago on my web site and this one.

My link is here:
http://www.cardomain.com/ride/325889/12

_________________
Adam
KJ is SOLD for a JK Rubi Unlimited!
2003 Renegade.

http://www.cardomain.com/ride/3199258

JeepTales