It is currently Fri Nov 06, 2026 7:36 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Is 4WD Engaging????
PostPosted: Thu Feb 15, 2007 7:52 pm 
Offline
LOST Member

Joined: Thu Feb 15, 2007 7:47 pm
Posts: 147
Location: Northern Virginia
Greetings all,

I am new to this board (and to Jeep's). I purchased an 2003 Liberty Renegade about a month ago and had a 4WD question. When I lift the handle to engage 4WD HI, there is no noise at all, it is very quiet and does not even shake the truck. Is this normal? The Part Time indicator lights up, but I am not sure if I should physically notice something "engaging" to let me know that is is in fact on. Thanks for your time.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 15, 2007 8:19 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8052
Location: Kentuckeeee
If the light comes on, its most likely in 4wd.


Why would the Jeep shake? :?

Edit: WELCOME TO LOST!!!! :D

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 15, 2007 8:22 pm 
Offline
LOST Member

Joined: Thu Feb 15, 2007 7:47 pm
Posts: 147
Location: Northern Virginia
I actually just thought that if something mechanical is locking together when shifting into 4WD, it would cause some type of noise or "shake". I am a complete newbie to this stuff, but have taken a real interest to it and would like to learn more about offroading and 4WD systems. The engineering that goes into these Jeep's is incredible.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 15, 2007 8:35 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8052
Location: Kentuckeeee
I have noticed a slight roar when in 4wd. No kind of vibration though.

When you put it into 4wd, it sends torque to the front wheels.

Even though you have it in 2wd, the front driveshaft and axle is still spinning. So 4wd simply applies torque to the front diff. :wink:

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 15, 2007 8:42 pm 
Offline
LOST Member

Joined: Thu Feb 15, 2007 7:47 pm
Posts: 147
Location: Northern Virginia
Ahhhh, I think I understand now. So, when sitting still, shifting into 4WD won't make any sounds or anything because the torque is being sent to the front, not necessarily "locking" any mechanical parts together? That makes sense. See, ask a question, learn something new. Thanks guy's.

P.S. Thank's for the welcome. I look forward to playing with the Jeep for years to come. I like the Jeep so much that I talked my Boss into buying one for his daughter, and she loves it. We are all planing on heading down to Camp Jeep this summer since it's here in VA., seems like a blast.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 15, 2007 8:45 pm 
Offline
LOST Member

Joined: Thu Oct 05, 2006 9:29 pm
Posts: 132
Location: Lenoxville, PA
just make sure you tell him about the ball joint recalls as well and get them replaced. there is some arguement about whether it is best to replace with moogs or not.

_________________
2003 Renegade 4X4
3.7l
roof lightbar
front brush guard
everthing else is stock for now


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 15, 2007 8:56 pm 
Offline
LOST Member

Joined: Thu Feb 15, 2007 7:47 pm
Posts: 147
Location: Northern Virginia
I told them about that. The dealer tried to tell them that it was already performed, but we looked online and saw that it wasn't. They finally agreed with us and performed the work.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 15, 2007 10:14 pm 
Offline
This member has been Banned

Joined: Thu Mar 16, 2006 7:18 pm
Posts: 2301
Location: Harahan LA (the burbs)
stratamet wrote:
Ahhhh, I think I understand now. So, when sitting still, shifting into 4WD won't make any sounds or anything because the torque is being sent to the front, not necessarily "locking" any mechanical parts together? That makes sense. See, ask a question, learn something new. Thanks guy's.

P.S. Thank's for the welcome. I look forward to playing with the Jeep for years to come. I like the Jeep so much that I talked my Boss into buying one for his daughter, and she loves it. We are all planing on heading down to Camp Jeep this summer since it's here in VA., seems like a blast.



I am not a fan of shifting in to and out of 4wd with the part time only or 241 case they tend to get stuck in neutral
I have not had issues with the 242 or the one with full time option but we ,the wife and I, still like to shift it the same
that is while rolling along slide tranny to N then pull up T-case to desired 4wd mode the trany to D for full time or 4hi and to 1 for 4lo
most time when in 4lo you do not want the tranny shifting gears so you should go to 1 also when using 4lo you will be in a situation where a gear shift would be bad


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 15, 2007 10:43 pm 
Offline
LOST Addict

Joined: Sat Mar 25, 2006 8:31 pm
Posts: 1465
Location: Kent, OH
stratamet wrote:
Ahhhh, I think I understand now. So, when sitting still, shifting into 4WD won't make any sounds or anything because the torque is being sent to the front, not necessarily "locking" any mechanical parts together? That makes sense. See, ask a question, learn something new. Thanks guy's.

You won't hear anything sitting still because you usually need to be moving/rolling to shift from 2wd to 4wd. I notice a light tug in the wheel and the steering gets a little heavier feel. Also feel a light thump through the t-case shifter handle. One thing to remember, park it in 4WD if you expect to need 4WD to get moving.

_________________
2005 Liberty Sport CRD, Lt Khaki, sunroof

Thankful to now be an EX-CRD owner.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 15, 2007 10:51 pm 
Offline
LOST Member
User avatar

Joined: Sat Jul 22, 2006 10:54 pm
Posts: 486
Location: Cartersville, Georgia
actually putting it into 2nd after putting into 4low is a little better especially in mud cause theres alittle less torque and I have found i get a little more traction. but just my experience.
and if your new to 4wheeling, u should find u a nice dirt hill and try to go up it in 2wd and see if you can make it, then do it again in 4wd and feel the difference in how much traction and pull you get, just a thought.

_________________
Drop what your doin, and go drive your jeep!!!!
03 Jeep Liberty Limited
4X4
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com