Need help big time installing bull bar*Im about to give up*

SnowgodCCR · **Posted:** Sat Mar 03, 2007 6:04 pm

02LibertyLimitedChick wrote:

Blue KJ in PA wrote:

That is classfied as extra plastic crap...left mine off when I trimmed the bumper cover after putting on my front hitch

yea well now hes having a hard time gettin THAT darn thing off without half breakin my bumper....Im about to SCREAM. I really dont think were gonna be able to get this thing put on.

Take the bumper off. Remove the tabs/screws that hold the airdam in place (the black thing). Put Bumper back on. Install Bullbar.

02LibertyLimitedChick · **Posted:** Sat Mar 03, 2007 6:16 pm

Got the black thing off......attempting to install the bull bar still. That is my problem now at the moment. It just seems like the holes dont line up/.

02LibertyLimitedChick · **Posted:** Sat Mar 03, 2007 6:33 pm

Ok so i don't think i have all the pieces im supposed to have......im going to circle what i do NOT have in the baggy that was sent to me with the bar.....
This thing that makes the screw fit into the hole which is larger (adapter type thing)

And I have smaller sized washers but none as big as this one in this pic

I just don't know.

02LibertyLimitedChick · **Posted:** Sat Mar 03, 2007 7:16 pm

HOLY CRAP I think we finally got it! lol Pics to follow...............

corwyyn · **Posted:** Sat Mar 03, 2007 7:21 pm

02LibertyLimitedChick wrote:

Ok so i don't think i have all the pieces im supposed to have......im going to circle what i do NOT have in the baggy that was sent to me with the bar.....
This thing that makes the screw fit into the hole which is larger (adapter type thing)

And I have smaller sized washers but none as big as this one in this pic

I just don't know.

You should be able to find the threaded clip nut (that funky adapter thingamajig) at any auto parts store, there should be a whole section for stuff like that. Just ask them to point you to the section for body clips, door handles etc. Don't forget to take the bolt you need it for so you can get the right one the first time. They should also have the fender washer, if they don't then Home Depot, Lowes or another home improvement store will.

02LibertyLimitedChick · **Posted:** Sat Mar 03, 2007 7:48 pm

THANK YOU very much to everyone who offered advice/support. The darn thing is finally on!!!!!

Lizzys07Liberty · **Posted:** Sat Mar 03, 2007 9:40 pm

Very glad you got it to work...and it looks great.

gone_jeepin · **Posted:** Sat Mar 03, 2007 9:56 pm

Yay good job!!! *initiating a slow clap* :lol:

Jeep Dawg · **Posted:** Sun Mar 04, 2007 12:49 am

OH MAN you seem to have had a hard time doing the bull bar. I did too when I did mine. I was the one who posted the 2 pictures of mine. I worked late today and did not see any post. I wish that i was home I would have walked you though every thing man.
Looks good and now all you need to do is add some lights to the bull bar. :!:

kelticknight · **Posted:** Thu Mar 08, 2007 6:23 pm

had one of those and replaced with one of these
http://cgi.ebay.ie/ws/eBayISAPI.dll?Vie ... :IT&ih=013
the new one was a big pain in the stupid
changed it the cycle clubs got eu here to ban on new 4x4,commericals,trucks with any type of bull bar from may 2007 this year onwards as they say you'll have 8% of survining a direct hit by 4x4 without a bull bar :shock:

as my liberity is 2002,wont be afected as any jeep,4x4 older than may 07 will be ok to have,so got a meaner looking bull bar

kelticknight · **Posted:** Thu Mar 08, 2007 6:25 pm

02LibertyLimitedChick wrote:

THANK YOU very much to everyone who offered advice/support. The darn thing is finally on!!!!!

looks good
like the front grill

Need help big time installing bull barIm about to give up

Who is online