It is currently Fri Nov 06, 2026 3:42 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Turbocharger went bad *FIXED*
PostPosted: Thu Mar 08, 2007 7:07 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Mar 03, 2006 2:38 pm
Posts: 801
Location: Tuscaloosa, AL
Brought the CRD to the dealer yesterday for a variety of issues, oil on the side of the motor (passenger) was one of them. They called me today and told me that the Turbocharger needs to be replaced. Is this a really bad thing? Should I be concerned? Any hoses I should check?

Thanks,
Daniel

_________________
2005 CRD Sport
Mods: Glasspack, OME HD Struts & Springs, 2" Daystar lift,
255/70/16 General Grabber AT2's on MOAB's
ORM&EHM with great success!
TJM T17 Bumper, 50W KC HID's
Image


Last edited by Endurance on Fri Mar 30, 2007 12:05 am, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 08, 2007 8:48 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jul 05, 2005 8:23 am
Posts: 3544
Location: New Braunfels, Texas
Have them replace the CAC hose with the newly designed one if you can. Have them clean the MAF and MAP sensors. Have them check the CAC (Intercooler) to see if it full of oil.

_________________
Founder of L.O.S.T.
2006 CRD Sport

Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 09, 2007 9:35 am 
Offline
Banned For Abuse on LostJeeps.com

Joined: Mon Feb 05, 2007 2:44 pm
Posts: 1856
Location: Buena Vista, CO
DarbyWalters wrote:
Have them replace the CAC hose with the newly designed one if you can. Have them clean the MAF and MAP sensors. Have them check the CAC (Intercooler) to see if it full of oil.




Do you have any idea of the capacity of the intercooler? Although I have some oil filming in the CAC hose, I have never "missed" any oil on the dip stick.

_________________
2006 Sport CRD

Could the Aztecs have known, that in 2012 after a 4 year experiment, our country would cease to exist?


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 09, 2007 9:52 am 
Offline
LOST Junkie

Joined: Mon Feb 06, 2006 12:24 pm
Posts: 902
I'm curious, do you religiously perform a idle turbo cooldown as specified in the owners manual?


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 09, 2007 10:26 am 
Offline
Banned For Abuse on LostJeeps.com

Joined: Mon Feb 05, 2007 2:44 pm
Posts: 1856
Location: Buena Vista, CO
Drewd wrote:
I'm curious, do you religiously perform a idle turbo cooldown as specified in the owners manual?




We have since day one, but as time goes by, I can see where some might get lazy on that.

_________________
2006 Sport CRD

Could the Aztecs have known, that in 2012 after a 4 year experiment, our country would cease to exist?


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 09, 2007 12:01 pm 
Offline
LOST Junkie

Joined: Sun Aug 13, 2006 9:08 am
Posts: 521
Location: Greem Vally, AZ
Did they give any ideas on the cause? And what failed?

_________________
2006 Libery Sport CRD, Lt Kakhi, nicely equipped
*****GDE Hot Tune at 38,879 miles
*****Stock TC.....for the time being!!


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 09, 2007 12:05 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Mar 03, 2006 2:38 pm
Posts: 801
Location: Tuscaloosa, AL
No they didnt say anything. I didnt really know what to say either though since I was really suprised. I just hope that the bad Turbocharger, coating my engine with oil, wont cause any longterm problems.

So far this Jeep hasnt caused me too much trouble, other than a TC and now the Turbo, but if it keeps going bad I will sell it for sure.

_________________
2005 CRD Sport
Mods: Glasspack, OME HD Struts & Springs, 2" Daystar lift,
255/70/16 General Grabber AT2's on MOAB's
ORM&EHM with great success!
TJM T17 Bumper, 50W KC HID's
Image


Top
 Profile  
 
 Post subject: Re: Turbocharger went bad
PostPosted: Fri Mar 09, 2007 1:37 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Jul 11, 2006 1:10 pm
Posts: 621
Location: Indianapolis, IN
Endurance wrote:
Brought the CRD to the dealer yesterday for a variety of issues, oil on the side of the motor (passenger) was one of them. They called me today and told me that the Turbocharger needs to be replaced. Is this a really bad thing? Should I be concerned? Any hoses I should check?

Thanks,
Daniel


Did you have any oil dripping on the ground/floor under your Jeep? Just wondering how they say a turbo went bad when it was seemingly still providing boost. My engine has a thin buildup of oil/dirt on the passenger side as well, but my level on the dipstick does not drop noticeably and I have no leaks on the floor.

Just seems weird that out of the blue they say the turbo is bad. I'd want a detailed explanation as to why/how.

_________________
'05 CRD Sport born on 06/20/05, bought on 9/23/05, L.O.S.T. on 9/27/05 - modding ever since:

Daystar 2.0" Lift, P255/70R16 Revos, Boulder Bars, Reese Front Hitch w/9k Hooks, Poison Spyder Rock Ring, MOPAR Skids/Bug Shield/Roof Rails/Mats, WARN Hitch Shackle(Rear), 10k Hitch Hook(Front), Custom Tilt/Slope Meter, Ammo Box Mod, Rotella T 5W-40.


Top
 Profile  
 
 Post subject: Re: Turbocharger went bad
PostPosted: Fri Mar 09, 2007 2:43 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Mar 03, 2006 2:38 pm
Posts: 801
Location: Tuscaloosa, AL
alljeep wrote:
Endurance wrote:
Brought the CRD to the dealer yesterday for a variety of issues, oil on the side of the motor (passenger) was one of them. They called me today and told me that the Turbocharger needs to be replaced. Is this a really bad thing? Should I be concerned? Any hoses I should check?

Thanks,
Daniel


Did you have any oil dripping on the ground/floor under your Jeep? Just wondering how they say a turbo went bad when it was seemingly still providing boost. My engine has a thin buildup of oil/dirt on the passenger side as well, but my level on the dipstick does not drop noticeably and I have no leaks on the floor.

Just seems weird that out of the blue they say the turbo is bad. I'd want a detailed explanation as to why/how.


I try and get a detailed explanation on why the turbo went bad. I am going back to the dealer in about 30minutes to test drive with a technician because the vehicle is pulling to the right. They said the new turbo wont be in until Tuesday the earliest.

_________________
2005 CRD Sport
Mods: Glasspack, OME HD Struts & Springs, 2" Daystar lift,
255/70/16 General Grabber AT2's on MOAB's
ORM&EHM with great success!
TJM T17 Bumper, 50W KC HID's
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 11, 2007 1:19 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Mar 03, 2006 2:38 pm
Posts: 801
Location: Tuscaloosa, AL
This is how my CAC hose looks like. That is the CAC hose right? I was pretty shocked when I touched it earlier because it is completely soaked with oil.

Image

_________________
2005 CRD Sport
Mods: Glasspack, OME HD Struts & Springs, 2" Daystar lift,
255/70/16 General Grabber AT2's on MOAB's
ORM&EHM with great success!
TJM T17 Bumper, 50W KC HID's
Image


Top
 Profile  
 
 Post subject: CCV vent?
PostPosted: Sun Mar 11, 2007 11:31 pm 
Offline
LOST Addict

Joined: Thu Feb 02, 2006 10:06 pm
Posts: 1201
Endurance wrote:
This is how my CAC hose looks like. That is the CAC hose right? I was pretty shocked when I touched it earlier because it is completely soaked with oil.


If you are not running a CCV filter or EHM then that is to be expected-- it is what most stock systems will look like. The oil in the CAC may not have much of anything to do with the turbo. You could get a new turbo and have the same amount of oil being spit into the CAC. The new CAC is solid black, not orange, though-- so it makes it harder to see the oil. You see, if you can't see it--- must not be a problem. DC hard at work solving your problems for you...


Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 12, 2007 11:40 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Mar 03, 2006 2:38 pm
Posts: 801
Location: Tuscaloosa, AL
Is there a HOW TO for a EHM somewhere? I checked FAQ section and Tech Articles Forum.

_________________
2005 CRD Sport
Mods: Glasspack, OME HD Struts & Springs, 2" Daystar lift,
255/70/16 General Grabber AT2's on MOAB's
ORM&EHM with great success!
TJM T17 Bumper, 50W KC HID's
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 12, 2007 11:59 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Oct 17, 2005 7:40 pm
Posts: 1137
Quote:
This is how my CAC hose looks like.


I just pulled my CAC hose today for regular maintenance - that's exactly how it looks with a Provent installed. My Provent is catching plenty of oil and its output hose to the turbo input is clean and dry. The oil in mine is from the turbo seals. Dealer says its normal. I suspect these AFC valves cycling during their open/close movement (to bring in egr gas) are causing pressure waves to backup in the turbo compressor, up against the seals and eventually weakening them to the point where they leak excessive engine oil.

_________________
2005 LTD CRD RB1 NAV/Htd Leather seats/Amsoil EA filters
SunCoast Mega Trans & Billet TC/PML pan/Aux cooler
Fuel cooler/Lift Pump/10um Pri/Racor R490 2um Sec Fuel Filters
IronMan Lift/Shocks/Provent/Moog ball joints/ V6 Airbox/Fan/Hayden
Cobalt Boost/EGT/Oil/Trans/Volt gauges/Aeroturbine 2525
Yeti Hot Tune/Odessey 65/Samco's/Michelin Defenders


Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 19, 2007 1:30 pm 
Offline
LOST Member
User avatar

Joined: Mon Jul 11, 2005 12:29 am
Posts: 461
Location: Michigan
My turbo was completely replaced about 2 weeks ago. We always give the turbo proper time to cool down.

_________________
2005 Unlimited (LJ) Rubicon w/ 5.5" of total lift
Flat Fenders made by http://www.jpfaboffroad.com/

"Democracy is two wolves and a lamb voting on what to have for lunch.
Liberty is a well-armed lamb contesting the vote." - Benjamin Franklin, 1759


Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 19, 2007 11:14 pm 
Offline
LOST Newbie

Joined: Wed Dec 07, 2005 1:23 pm
Posts: 76
My brothers 2005 CRD had the turbo fail last week. It is still in the shop. He said it simply lost power and made a little funny noise. He is not very mechanically inclined, and he immediately took it in before I could see it. He has about 30k miles on his and is very good about maintenance through the dealer. I wonder if the dealer has been using only the proper synthetic oil that is specified. They offered him oil changes for life, or something similiar, when he bought to move the thing off the lot, so I would bet the dealer is putting in cheapo oil. He does not have any mods on his rig except for an aftermarket muffler.

He has had a number of problems with his and it has spent atleast 3 weeks in the shop. Luckily he has an extended warranty which provides a rental car immediately upon drop off.

Makes you wonder.

_________________
2005 Liberty CRD Limited,
Daystar 2.5" lift, Rubi Moabs with
255/70/16 Grabber AT2's,
Dark Khaki and most options.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 19, 2007 11:44 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Mar 03, 2006 2:38 pm
Posts: 801
Location: Tuscaloosa, AL
had to wait over a week for the turbo charger to come in, its SUPPOSED to be here tomorrow, along with a new CAC hose.

_________________
2005 CRD Sport
Mods: Glasspack, OME HD Struts & Springs, 2" Daystar lift,
255/70/16 General Grabber AT2's on MOAB's
ORM&EHM with great success!
TJM T17 Bumper, 50W KC HID's
Image


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 20, 2007 9:04 am 
Offline
LOST Member
User avatar

Joined: Mon Jul 11, 2005 12:29 am
Posts: 461
Location: Michigan
I too waited over a week. About 11 or 12 days to be exact. My CRD has about 32K miles on it. The service mgr. stated something about the turbo being on "Galactic Backorder."

_________________
2005 Unlimited (LJ) Rubicon w/ 5.5" of total lift
Flat Fenders made by http://www.jpfaboffroad.com/

"Democracy is two wolves and a lamb voting on what to have for lunch.
Liberty is a well-armed lamb contesting the vote." - Benjamin Franklin, 1759


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 28, 2007 3:03 pm 
Offline
LOST Junkie
User avatar

Joined: Fri Mar 03, 2006 2:38 pm
Posts: 801
Location: Tuscaloosa, AL
Does anybody know how long its officially suppose to take to install that new turbo?

_________________
2005 CRD Sport
Mods: Glasspack, OME HD Struts & Springs, 2" Daystar lift,
255/70/16 General Grabber AT2's on MOAB's
ORM&EHM with great success!
TJM T17 Bumper, 50W KC HID's
Image


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 30, 2007 12:02 am 
Offline
LOST Junkie
User avatar

Joined: Fri Mar 03, 2006 2:38 pm
Posts: 801
Location: Tuscaloosa, AL
Just got it back today, they replaced the turbo and all kinds of stuff that goes to/away from it. WOW, it runs great, it feels like its got more torque and hp!

_________________
2005 CRD Sport
Mods: Glasspack, OME HD Struts & Springs, 2" Daystar lift,
255/70/16 General Grabber AT2's on MOAB's
ORM&EHM with great success!
TJM T17 Bumper, 50W KC HID's
Image


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 30, 2007 12:10 am 
Offline
LOST Junkie

Joined: Fri Mar 31, 2006 7:52 am
Posts: 514
Location: Zionsville, IN
Endurance wrote:
Just got it back today, they replaced the turbo and all kinds of stuff that goes to/away from it. WOW, it runs great, it feels like its got more torque and hp!


I'm curious as to what Garrett Turbo Model is being used, did they specify a model on the Repair Order?

_________________
2005 Black CRD Limited w/105,000 miles
Mann Provent 200, Airbox Mod, ORM Mod
New 545RFE, TC & Redesigned pump @ 25,020 miles
New EGR Flow Control Valve @ 25,020 miles
New Transfer Case input/output seals @ 32,787 miles
SEGR Kit @ 52,000 miles
SunCoast TC and Transgo Shift Kit @ 52,000 miles


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com